Measurement of the spatial resolution and the relative density resolution in an industrial cone-beam micro computed tomography system

WANG Yan-Fang; UE Jie-Min; CAO Da-Quan; SUN Cui-Li; ZHAO Wei; WEI Cun-Feng; SHI Rong-Jian; WEI Long

doi:10.1088/1674-1137/37/7/078202

Chinese Physics C> 2013, Vol. 37> Issue(7) : 078202 DOI: 10.1088/1674-1137/37/7/078202

Measurement of the spatial resolution and the relative density resolution in an industrial cone-beam micro computed tomography system

Abstract
HTML
Reference
Related

PDF

Abstract：
The spatial resolution and the relative density resolution are the two most critical indicators in CT system. The method recommended in the ASTM E1695-95 and GJB 5311-2004 is only suitable to the fan-beam CT system. In this paper, for industrial cone-beam micro CT system, we will adopt the edge response function (ERF) created by the step edges of a steel ball to measure the system 3D PSF and MTF. To describe the contrast discrimination function more accurately, we will first propose to extend the two-dimensional measurement region to the three-dimensional space. Our experimental spatial resolution is (55.56±0.56) lp/mm and the relative density resolution is 1% within 300 μm×300 μm×300 μm according to the 3σ rule.

References

[1]

CHEN Zi-Kuan, NING Ruo-La. Proc. of SPIE, 2007. 65100F[2] E1695-1995. American Society for Testing and Material(ASTM), 1995[3] GJB5311-2004, National Military Standard (NMS), 2004[4] CHEN Z K, NING R L. Phy. Med. Bio., 2004, 49(10): 1865-1880[5] YAN Yong-Lian, LIU Li, QUE Jie-Min et al. The Tenth. Conf. on NDT Tech., 2007. 56[6] CHEN Z K, NING R L, Conover D et al. Opt. Eng., 2006, 45(9): 97003-1-11[7] Van de Casteele E, Van Dyck D, Sijbers J et al. Phy. Med. Ima., 2004, 5370: 2089-2096[8] La Feldkamp, Lc Davis, Jw Kress, J. Opt. Soc. Am. A, 1984, 1(6): 612-619[9] Canny J. IEEE Transactions on Pattern Analysis and Machine Intelligence, 1986, PAMI-8(6): 679-698

Access

Get Citation

WANG Yan-Fang, UE Jie-Min, CAO Da-Quan, SUN Cui-Li, ZHAO Wei, WEI Cun-Feng, SHI Rong-Jian and WEI Long. Measurement of the spatial resolution and the relative density resolution in an industrial cone-beam micro computed tomography system[J]. Chinese Physics C, 2013, 37(7): 078202. doi: 10.1088/1674-1137/37/7/078202

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2012-08-31
Revised: 2012-11-06

Article Metric

Article Views(3312)
PDF Downloads(349)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Measurement of the spatial resolution and the relative density resolution in an industrial cone-beam micro computed tomography system

Received Date: 2012-08-31
Accepted Date: 2012-11-06
Available Online: 2013-07-05

Abstract: The spatial resolution and the relative density resolution are the two most critical indicators in CT system. The method recommended in the ASTM E1695-95 and GJB 5311-2004 is only suitable to the fan-beam CT system. In this paper, for industrial cone-beam micro CT system, we will adopt the edge response function (ERF) created by the step edges of a steel ball to measure the system 3D PSF and MTF. To describe the contrast discrimination function more accurately, we will first propose to extend the two-dimensional measurement region to the three-dimensional space. Our experimental spatial resolution is (55.56±0.56) lp/mm and the relative density resolution is 1% within 300 μm×300 μm×300 μm according to the 3σ rule.

HTML

Reference (1)

Link: IOPScience; SCOAP³; arXiv; Chinese Physical Society

Journal information: Introduction; Editorial Board; Others; Subscribe

Contact us: QQ: 1307685413; Tel: +86-010-88235947; Fax: +86-010-88233126; E-mail: cpc@ihep.ac.cn

CPC Website
IOP Website
CPC WeChat

Supported by: Beijing Renhe Information Technology Co. Ltd E-mail: info@rhhz.net

DownLoad: Full-Size Img PowerPoint

Return

Measurement of the spatial resolution and the relative density resolution in an industrial cone-beam micro computed tomography system

Abstract：

References

Access

Article Metrics

Metrics

通讯作者: 陈斌, bchen63@163.com

Email This Article

Measurement of the spatial resolution and the relative density resolution in an industrial cone-beam micro computed tomography system

HTML

目录

[1]	Ronghao Hu , Qike Gu , Kejian Shi , Zezhong Wei , Meng Lv , Shiyang Zou , Yongkun Ding . Polarized neutron beams from polarized deuterium-tritium fusion with applications to magnetic field imaging in high-energy-density plasmas. Chinese Physics C, 2025, 49(12): 124102. doi: 10.1088/1674-1137/adec4f
[2]	Zhen-Ming Xu , Bin Wu , Tao Yang , Wen-Li Yang . A new measure of thermal micro-behavior for the AdS black hole. Chinese Physics C, 2021, 45(1): 015106. doi: 10.1088/1674-1137/abc23e
[3]	HUANG Jiang , XIONG Yong-Qian , CHEN De-Zhi , LIU Kai-Feng , YANG Jun , LI Dong , YU Tiao-Qin , FAN Ming-Wu , YANG Bo . A permanent magnet electron beam spread system used fora low energy electron irradiation accelerator. Chinese Physics C, 2014, 38(10): 107008. doi: 10.1088/1674-1137/38/10/107008
[4]	YANG Hong-Xun (for the BESⅡ collaboration) . Partial wave analysis of J/ψ→ppπ⁰ and measurement of J/ψ→ppη, ppη´. Chinese Physics C, 2009, 33(12): 1331-1335. doi: 10.1088/1674-1137/33/12/048
[5]	PENG Quan-Ling , SUN Jian , ZHAO Guang-Yuan , SHI Cai-Tu . Principle and Software Design of Helmhotz Coil Measurement System. Chinese Physics C, 2001, 25(9): 920-925.
[6]	WANG Man , LI Jin , CUI Xiang-Zong , XIA Xiao-Mi , LAI Yuan-Fen , YAO Xiao-Guang . PROTOTYPE OF END CAP SHOWER COUNTERAND ITS BEAM TEST. Chinese Physics C, 1987, 11(3): 321-326.