Introduction of the Trigger System and the Measurement for Trigger Efficiency at L3+Cosmics Experiment

LI Zhong-Chao; YU Zhong-Qiang; GUO Ya-Nan; XU Yu-Peng; YAO Zhi-Guo; LI De

Chinese Physics C> 2002, Vol. 26> Issue(2) : 172-179

Introduction of the Trigger System and the Measurement for Trigger Efficiency at L3+Cosmics Experiment

Institute of High Physics, CAS, Beijing 100039, China

Abstract
HTML
Reference
Related

PDF

Abstract：
The trigger process of L3+Cosmics experiment at CERN is introduced briefly. Also we checked whether the settings of L3+Cosmics trigger system by simulation are correct or not and introduced a method on trigger efficiency calculation. To get trigger efficiency for μ spectrum measurement, an experimental data sample, which includes events passing the trigger set to measure the μ spectrum and not passing, is needed. Then L?3+C trigger process is simulated with these events in this sample to know how many events should pass the trigger. By checking a trigger bit recorded in the experimental data, one can know how many events passed the trigger in hardware in these simulated events. The ratio then determines the trigger efficiency for μ spectrum measurement. And the systematic error is analyzed. The results on trigger efficiency have been used to the measurement of μ spectrum.

[1]	Xin Wu , Qi Chen , Ye Xing , Zhi-Peng Xing , Ruilin Zhu . SU(3) flavor symmetry analysis of hyperon non-leptonic two body decays. Chinese Physics C, 2025, 49(12): 123101. doi: 10.1088/1674-1137/adf1f1
[2]	ZHANG Cong , HE Yuan , ZHAO Hong-Wei , ZHANG Sheng-Hu . Multipacting simulation and analysis of a taper quarter wave cavity by using Analyst-PT3P. Chinese Physics C, 2012, 36(4): 362-366. doi: 10.1088/1674-1137/36/4/012
[3]	GUO Yun-Jun , HE Kang-Lin . Muon Identification Using the Efficiencies Ratio Method at BESⅡ. Chinese Physics C, 2007, 31(11): 1050-1055.
[4]	HUANG Wen-Xue , WANG Yue , ZHU Zhi-Chao , TIAN Yu-Lin , XU Hu-Shan , SUN Zhi-Yu , XIAO Guo-Qing , ZHAN Wen-Long . Experimental Study of the High-Voltage Breakdown and Simulations for the RFQ Cooler and Buncher RFQ1L. Chinese Physics C, 2006, 30(S2): 261-264.
[5]	ZHOU Yong-Zhao , LIANG Hao , XUE Jun-Dong , CHEN Yi-Xin , YANG Tao , GONG Da-Tao , JIN Ge , YU Xiao-Qi . An Online Program for Monitoring KLOE Experiment. Chinese Physics C, 2002, 26(6): 620-625.
[6]	PENG Quan-Ling , SUN Jian , ZHAO Guang-Yuan , SHI Cai-Tu . Principle and Software Design of Helmhotz Coil Measurement System. Chinese Physics C, 2001, 25(9): 920-925.
[7]	Xu Jianming . Matching Problem of Lattice with Transverse Coupling. Chinese Physics C, 1995, 19(1): 73-81.
[8]	BES Collaboration . Experimental Study of Resonance f₂(1270) in the J/ψ Hadronic Decay. Chinese Physics C, 1993, 17(2): 97-106.
[9]	CHANG KONG-LIANG . DIMENSIONAL METHOD TO SOLVE THE DIFFUSION CONVECTION EQUATION OF SOLAR COSMIC RAYS. Chinese Physics C, 1978, 2(3): 200-210.

Access

Get Citation

LI Zhong-Chao, YU Zhong-Qiang, GUO Ya-Nan, XU Yu-Peng, YAO Zhi-Guo and LI De. Introduction of the Trigger System and the Measurement for Trigger Efficiency at L3+Cosmics Experiment[J]. Chinese Physics C, 2002, 26(2): 172-179.

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2001-04-28
Revised: 1900-01-01

Article Metric

Article Views(3654)
PDF Downloads(693)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Introduction of the Trigger System and the Measurement for Trigger Efficiency at L3+Cosmics Experiment

Corresponding author: LI Zhong-Chao,

Institute of High Physics, CAS, Beijing 100039, China

Received Date: 2001-04-28
Accepted Date: 1900-01-01
Available Online: 2002-02-05

Abstract: The trigger process of L3+Cosmics experiment at CERN is introduced briefly. Also we checked whether the settings of L3+Cosmics trigger system by simulation are correct or not and introduced a method on trigger efficiency calculation. To get trigger efficiency for μ spectrum measurement, an experimental data sample, which includes events passing the trigger set to measure the μ spectrum and not passing, is needed. Then L?3+C trigger process is simulated with these events in this sample to know how many events should pass the trigger. By checking a trigger bit recorded in the experimental data, one can know how many events passed the trigger in hardware in these simulated events. The ratio then determines the trigger efficiency for μ spectrum measurement. And the systematic error is analyzed. The results on trigger efficiency have been used to the measurement of μ spectrum.