-
Abstract:
Recently, a kind of proton synchrotron with high repetition rate is developed and comes into wide use. But this leads to more severe requirements on the ferrites which are used in the RF system in accelerators. One of them is the time response. In this paper, the characteristic of time response and the measurement method are presented.
-
-
References
[1]
|
NAi Staff, Operating Results from NAL. IEEE XS-20, No. 3, p. 191.[2] A. V. Rauches et al., Commissioning of the ARGONNE Intense Pulsed Neutron Source(IPNS-1) Accelerator. IEEE NS-26, No. 3, p. 3006.[3] 秦玖、李建国、赵升初, 质子同步加速器用铁氧体大环特性的动态测试, 第五届全国磁学会议, 1983, 10.[4] L. B. Rosenbaum. Magnetic Lag and Dynamic High-frequency, Absorption in Ferrites. SovietPhysics-Solid State, Vol. 9 No. 5(1967), 1013.[5] Vodopyanob, et al., Features of Ferrite Applying for Automatic Tuning of the PS Accelerating Cavity. 7th Inter. Conf. on High Energy Acc., p. 418, 1969.[6] 严太玄、孙立博, 高能物理与核物理, 7(1983), 346.[7] 李荫运, 李国栋, 铁氧体物理学, 科学出版社.
|
-
-
Access
-
-