A HIGH GRADIENT 250keV PULSED PROTON BEAM ACCELERATING EQUIPMENT

Chinese Physics C> 1981, Vol. 5> Issue(6) : 722-731

A HIGH GRADIENT 250keV PULSED PROTON BEAM ACCELERATING EQUIPMENT

Institute of High Energy Physics, Academia Sinica

Abstract
HTML
Reference
Related

PDF

Abstract：
Up to 240 mA of pulsed proton beam has been extracted at 250 keV from an accelerating equipment with a high gradient "Pierce" accelerating tube. Normalized beam emittance is 0.36π cm-mrad (at 180 keV, 120 mA 100μs, 10pps). The design parameters and some preliminary test results of this equipment including a 250 kV C-W high voltage generator, an accelerating tube and a duoplasmatron are reported in this paper. This equipment is built for BPS preinjector study.

References

[1]

“预注入器”HP}初步设计草案第二册.[2] C. W. Wheeler, Proe. 8th Inter. Coat. on High Energy Accel. CERN 1971, p, 531;C. R. Emigh et al., Proc. 1970 Proton Linac Accel. Conf., V. II, p. 1007.[3] Y. J. govarik and Th. J. M. Slnytera, BNL-50120, p. 251.[4] C. R. Emigh, E. A. Meyer and D.W.Mueller, IEEE, NS16, No. 3(1969), 48.[5] C. R. Emigh, LA-8809, p. 898.

[1] Li Yangguo . Antiproton -Nucleus Charge Exchange Reaction and Inelastic Scattering. Chinese Physics C, 1996, 20(11): 1021-1027.
Access

Get Citation

A HIGH GRADIENT 250keV PULSED PROTON BEAM ACCELERATING EQUIPMENT[J]. Chinese Physics C, 1981, 5(6): 722-731.

A HIGH GRADIENT 250keV PULSED PROTON BEAM ACCELERATING EQUIPMENT[J]. Chinese Physics C, 1981, 5(6): 722-731. shu

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 1981-05-27
Revised: 1900-01-01

Article Metric

Article Views(2571)
PDF Downloads(289)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

A HIGH GRADIENT 250keV PULSED PROTON BEAM ACCELERATING EQUIPMENT

Institute of High Energy Physics, Academia Sinica

Received Date: 1981-05-27
Accepted Date: 1900-01-01
Available Online: 1981-12-05

Abstract: Up to 240 mA of pulsed proton beam has been extracted at 250 keV from an accelerating equipment with a high gradient "Pierce" accelerating tube. Normalized beam emittance is 0.36π cm-mrad (at 180 keV, 120 mA 100μs, 10pps). The design parameters and some preliminary test results of this equipment including a 250 kV C-W high voltage generator, an accelerating tube and a duoplasmatron are reported in this paper. This equipment is built for BPS preinjector study.