1kW S-Band RF Solid State Amplifier for BEPC Linac Microwave Driver System

ZHAO Feng-Li; HUANG Yong-Qing

Chinese Physics C> 2003, Vol. 27> Issue(11) : 1031-1033

1kW S-Band RF Solid State Amplifier for BEPC Linac Microwave Driver System

ZHAO Feng-Li ^, ,
HUANG Yong-Qing

Institute of High Energy Physics, CAS, Beijing 100039, China2 Institute of Beijing Radio Measurement, Beijing 100854, China

Abstract
HTML
Reference
Related

PDF

Abstract：
This paper presents the development of a 1kW S-Band RF Solid State Amplifier (SSA) for the BEPC Linac. IkW peak power with a pulse width of 2-10μs under low voltage operation is achieved by combining eight 160W high power Solid State Amplifiers using a low-loss(0.3dB) combiner. Other key performance parameters are: RF phase drift during pulse ≤±1 degree, RF rise time/fall time is 88ns/40ns, RF pulse flatness is 0.7 % , and RF power stability is 0.1dB.
References

[1] Hanczor M, Kumar M. 12kW S–Band Solid State Transmitter for Modern Radar Systems, IEEE, 1993

Access

Get Citation

ZHAO Feng-Li and HUANG Yong-Qing. 1kW S-Band RF Solid State Amplifier for BEPC Linac Microwave Driver System[J]. Chinese Physics C, 2003, 27(11): 1031-1033.

ZHAO Feng-Li and HUANG Yong-Qing. 1kW S-Band RF Solid State Amplifier for BEPC Linac Microwave Driver System[J]. Chinese Physics C, 2003, 27(11): 1031-1033. shu

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2003-04-01
Revised: 1900-01-01

Article Metric

Article Views(3417)
PDF Downloads(525)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142