Thermal Structural Analysis and Test of the New Electron Gun for NEPCⅡ Linac

ZHOU Zu-Sheng; LIU Bo

Chinese Physics C> 2005, Vol. 29> Issue(12) : 1196-1199

Thermal Structural Analysis and Test of the New Electron Gun for NEPCⅡ Linac

ZHOU Zu-Sheng ^, ,
LIU Bo

Institute of High Energy Physics,CAS,Beijing 100049,ChinaGraduate University of Chinese Academy of Sciences,Beijing 100049,China

Abstract
HTML
Reference
Related

PDF

Abstract：
The Beijing Electron Positron Collider Upgrade Project (BEPCⅡ) requires its injector linac to upgrade the beam energy and current. Hence the high emission current and low emittance electron gun must be newly designed and fabricated to meet the requirement of high positron beam current.This paper describes the temperature field distribution in the gun and the gun deformation caused by this distribution which is performed by using ANSYS. According to the real complex structure and the energy conversion inside the electron gun, we took conduction as the main energy conversion form after deep consideration and then got the temperature field. The coincidence between the temperature field and the structural deformation is also described. In this paper, the beam optics simulated by EGUN before and after structure deformation is discussed, and the valuable results have been obtained. The test results and simulation results are analyzed and compared.

References

[1]

. BEPCⅡ Design Report—Injector Linac Part: IHEP-BEPCⅡ-SB-03-2. Institute of High Energy Physics, CAS,Nov. 20032. ANSYS Release 7.0. ANSYS, Inc. 20023. Herrmannsfeldt W B. EGUN—An Electron Optics andGun Design Program: SLAC-Report-331. Stanford, Oct.19884. Park S J, Kim S H, Park Y J et al. Fabrication and Test of Pulsed 200-MW Electron Gun for High-Power Klystrons.Proc. of Linac 2002. Gyeongju, Korea, Aug. 20025. LIU Bo, GU M P, CHI Y L et al. HEP NP, 2005, 29(5):507—511(in Chinese)(刘波，顾孟平，池云龙等.高能物理与核物理，2005, 29(5):507-511)

Access

Get Citation

ZHOU Zu-Sheng and LIU Bo. Thermal Structural Analysis and Test of the New Electron Gun for NEPCⅡ Linac[J]. Chinese Physics C, 2005, 29(12): 1196-1199.

ZHOU Zu-Sheng and LIU Bo. Thermal Structural Analysis and Test of the New Electron Gun for NEPCⅡ Linac[J]. Chinese Physics C, 2005, 29(12): 1196-1199. shu

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2005-04-27
Revised: 1900-01-01

Article Metric

Article Views(4197)
PDF Downloads(737)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Thermal Structural Analysis and Test of the New Electron Gun for NEPCⅡ Linac

ZHOU Zu-Sheng ^,
LIU Bo

Corresponding author: ZHOU Zu-Sheng,

Institute of High Energy Physics,CAS,Beijing 100049,ChinaGraduate University of Chinese Academy of Sciences,Beijing 100049,China

Received Date: 2005-04-27
Accepted Date: 1900-01-01
Available Online: 2005-12-05

Abstract: The Beijing Electron Positron Collider Upgrade Project (BEPCⅡ) requires its injector linac to upgrade the beam energy and current. Hence the high emission current and low emittance electron gun must be newly designed and fabricated to meet the requirement of high positron beam current.This paper describes the temperature field distribution in the gun and the gun deformation caused by this distribution which is performed by using ANSYS. According to the real complex structure and the energy conversion inside the electron gun, we took conduction as the main energy conversion form after deep consideration and then got the temperature field. The coincidence between the temperature field and the structural deformation is also described. In this paper, the beam optics simulated by EGUN before and after structure deformation is discussed, and the valuable results have been obtained. The test results and simulation results are analyzed and compared.