Researches on Bake Effect on RF Superconducting Cavities

HAO Jian-Kui; ZHAO Kui; ZHU Feng

Chinese Physics C> 2005, Vol. 29> Issue(9) : 918-922

Researches on Bake Effect on RF Superconducting Cavities

MOE Key Laboratory of Heavy Ion Physics, Institute of Heavy Ion Physics, Peking University, Beijing 100871, China

Abstract
HTML
Reference
Related

PDF

Abstract：
The Q-slope at high gradient affects the performance of superconducting cavity greatly. Recent researches show that low temperature (100—150)°C heat treatment (bake) has positive effects on the performance of superconducting cavities. A lot of cavity tests are analyzed based on bake treatment. The average gradient E_{acc, max} and Eacc at Q=1×10¹⁰ are increased by more than 3.5MV/m. Q at E_{acc, max} is increased and the Q-slope is improved. Analysis on bake temperature shows that higher bake temperature leads to higher Q value. Comparison of BCP and EP cavities shows that at least 60—80μm EP is needed for BCP surface. More than 10—15μm removal of the surface by BCP will degrade the performance of an EP cavity. Oxygen diffusion model is used to illustrate bake effect.

References

[1]

. Visentin B et al. Cavity Baking: a Cure for the High Accelerator Field Q0 Drop. Proc. of the 9th Workshop on RF Superconductivity. Los Alamos National Laboratory, 1999.1982. Safa H. High Field Behavior of SCRF Cavities. Proc. of the 10th Workshop on RF Superconductivity. Tsukuba: KEK,2001. 2793. Lilje L et al. Electropolishing and In-Situ Baking of 1.3GHz Niobium Cavities. Proc. of the 9th Workshop on RF Superconductivity. Los Alamos National Laboratory, 1999. 744. Lilje L. High Accelerating Gradient in 1.3GHz Niobium Cavities. Proc. of the 10th Workshop on RF Superconductivity. Tsukuba: KEK, 2001. 2875. Kneisel P. Preliminary Experience with In-Situ Baking of Niobium Cavities. Proc. of the 9th Workshop on RF Superconductivity. Los Alamos National Laboratory, 1999. 3286. Visentin B. Change of RF Superconducting Parameters Induced by Heat Treatment on Niobium Cavities. Proc. of the 2001 Particle Accelerator Conference. Chicago: ANL,2001. 10567. Brinkmann R, Floettmann K, Rossbach J et al. TESLA Technical Design Report. Hamburg:DESY, 2001. Ⅱ-148. Palmer F L. IEEE Trans. Magn., 1987, 23(2): 16179. Grundner M, Halbritter J. J. Appl. Phys., 1979, 51: 39710. Bonin B. Materials for Superconducting Cavities. Proc. of CERN Accelerator School CERN96-03. Hamburg, 1996.19111. Hagen M. Internal Report, WU D 88-8. University of Wuppertal, March 198812. Knobloch J et al. High Field Q Slope in SC Cavities due to Magnetic Field Enhancement at Grain Boundaries. Proc. of the 9th Workshop on RF Superconductivity. Los Alamos National Laboratory, 1999. 7713. Halbritter J. Material Science of Nb RF Accelerator Cavities: Where doWe Stand 2001? Proc. of the 10thWorkshop on RF Superconductivity. Tsukuba: KEK, 2001. 29214. Halbritter J. IEEE Trans. on Appl. Supercond, 2001, 11:1864

[1]	BIAN Lin , LI Shao-Peng , LIU Ya-Ping . Measurements of Static Heat Loss and Unloaded Q₀ on the BEPCⅡ SRF Cavities. Chinese Physics C, 2008, 32(S1): 166-168.
[2]	XU Wen-Can , QUAN Sheng-Wen , HAO Jian-Kui , JIANG Tao , ZHANG Bao-Cheng , ZHAO Kui . Measurement and Adjustment of Dumb-Bells for 9-cell TESLA Cavity. Chinese Physics C, 2008, 32(S1): 154-156.
[3]	PAN Wei-Min , WANG Guang-Wei , . Calculation of the External Quality Factor of the High Power Input Coupler for the BEPCII Superconducting Cavity. Chinese Physics C, 2008, 32(1): 72-74. doi: 10.1088/1674-1137/32/1/016
[4]	HAO Jian-Kui , ZHAO Kui . Recent Progress on RF Superconductivity and ERL. Chinese Physics C, 2008, 32(S1): 200-203.
[5]	HAO Jian-Kui , ZHAO Kui , ZHANG Bao-Cheng , QUAN Sheng-Wen , WANG Li-Fang , CHEN Jia-Er . Researches on Large Grain SC Cavities at Peking University. Chinese Physics C, 2008, 32(S1): 181-183.
[6]	ZHONG Juan , PAN Wei-Min . Study on the Performance of the Input Coupler for the BEPCⅡ Superconducting RF Cavity. Chinese Physics C, 2006, 30(10): 1014-1017.
[7]	GE Ming-Qi , ZHAO Sheng-Chu , SUN Hong , GAO Jie . Design study on 1.3GHz Mono-cell High Gradient Low Loss Superconducting Cavity. Chinese Physics C, 2006, 30(4): 354-358.
[8]	GE Ming-Qi , ZHAO Sheng-Chu . Lorentz Force Detuning Analysis of 700MHz Single-Cell Superconducting Cavity. Chinese Physics C, 2005, 29(4): 413-417.
[9]	SUN Hong , ZHAO Sheng-Chu , GE Ming-Qi . Magnetic Shield for the Vertical Test System of Superconducting Cavity. Chinese Physics C, 2005, 29(10): 989-992.
[10]	WANG Gui-Mei , WU Wen-Zong , Xiangyang LU , ZHANG Bao-Cheng , QUAN Sheng-Wen , ZHU Feng , LIN LIN , JIAO Fei , ZHAO Kui . Study on HOMs in 1+1/2 Cell Superconducting Cavity. Chinese Physics C, 2005, 29(11): 1077-1080.
[11]	HAO Jian-Kui , HUANG Sen-Lin , ZHU Feng , QUAN Sheng-Wen , ZHAO Kui . Researches on the Electromagnetic Field in RF Superconducting Cavities. Chinese Physics C, 2005, 29(8): 806-809.
[12]	PAN Wei-Min , SUN Yi , WANG Guang-Wei , Takaaki Furuya , ichi Kurokawa . Studies on Higher Order Modes in BEPCⅡ Superconducting Cavity. Chinese Physics C, 2004, 28(3): 317-320.
[13]	WU Xiao-Shan , TAN Wei-Shi , JIANG Shu-Sheng , WU Zhong-Hua , DING Yong-Fan , . Microstructures of Ge/Si Superlattices Growtn at Low Temperature. Chinese Physics C, 2003, 27(8): 739-743.
[14]	LIN Zhi-Gang , ZHOU Lin , CHEN Huai-Bi , ZHAO Zhen-Tang . Suppression of HOM's on a Prototype Superconducting Cavity by Absorbers. Chinese Physics C, 2003, 27(8): 735-738.
[15]	LI Zhong-Quan , ZHANG Chuang . Study of Heavily Damped SC RF Cavity. Chinese Physics C, 2003, 27(10): 919-925.
[16]	HU Yan-Le , ZHAO Kui , CHEN Jia-Er , ZHANG Bao-Cheng , HAO Jian-Kui , WANG Li-Fang . Design of a New DC-RF Injector Used in High Average Power FEL. Chinese Physics C, 2001, 25(8): 787-792.
[17]	HAO Jian-Kui , ZHAO Kui , ZHANG Bao-Cheng , XIE Da-Lin , WANG Li-Fang , QUAN Sheng-Wen , SHEN Zi-Lin , TANG Yu-Xing , ZHANG Yun-Chi , YANG Xi , HU Yan-Le , ZHAO Kun . Researches and Preliminary Experiments on Copper-Niobium Sputtered Low-β Superconducting Resonator. Chinese Physics C, 2001, 25(6): 582-587.
[18]	Zu Donglin , Chen jiaer . Study on SRF Multicell Accelerating Cavity for Linear Collider and Trapped Modes. Chinese Physics C, 1997, 21(2): 180-186.
[19]	Zu Donglin . Concept Design of a New Structure of 1.3GHz Single-Cell Superconducting Cavity. Chinese Physics C, 1996, 20(11): 1041-1052.
[20]	Zu Donglin , Chen Jiaer . The Measurement Principle of RF Superconducting Nb Cavity. Chinese Physics C, 1996, 20(7): 663-672.

Access

Get Citation

HAO Jian-Kui, ZHAO Kui and ZHU Feng. Researches on Bake Effect on RF Superconducting Cavities[J]. Chinese Physics C, 2005, 29(9): 918-922.

HAO Jian-Kui, ZHAO Kui and ZHU Feng. Researches on Bake Effect on RF Superconducting Cavities[J]. Chinese Physics C, 2005, 29(9): 918-922. shu

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2005-01-07
Revised: 1900-01-01

Article Metric

Article Views(1781)
PDF Downloads(822)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Researches on Bake Effect on RF Superconducting Cavities

Corresponding author: HAO Jian-Kui,

MOE Key Laboratory of Heavy Ion Physics, Institute of Heavy Ion Physics, Peking University, Beijing 100871, China

Received Date: 2005-01-07

Accepted Date: 1900-01-01

Available Online: 2005-09-05

Abstract: The Q-slope at high gradient affects the performance of superconducting cavity greatly. Recent researches show that low temperature (100—150)°C heat treatment (bake) has positive effects on the performance of superconducting cavities. A lot of cavity tests are analyzed based on bake treatment. The average gradient E_{acc, max} and Eacc at Q=1×10¹⁰ are increased by more than 3.5MV/m. Q at E_{acc, max} is increased and the Q-slope is improved. Analysis on bake temperature shows that higher bake temperature leads to higher Q value. Comparison of BCP and EP cavities shows that at least 60—80μm EP is needed for BCP surface. More than 10—15μm removal of the surface by BCP will degrade the performance of an EP cavity. Oxygen diffusion model is used to illustrate bake effect.

HTML

Reference (1)

Researches on Bake Effect on RF Superconducting Cavities

Abstract：

References

Access

Article Metrics

Metrics

通讯作者: 陈斌, bchen63@163.com

Email This Article