I/Q Methods Applied to Phase Detection of RF Signals

  • Phase detection performs a crucial role in the phase control loop of RF signals in accelerators. This paper presents two methods that apply I/Q technique to phase detection of RF signals. The content includes the study of arithmetic and the setup of systems. The methods are as follows: 1. adopting I/Q demodulator, AD card and the technique of digital processing to detect the phase; 2. direct digital I/Q method. In the former, feasible calibration arithmetic against the inherent error of I/Q demodulators is suggested. In the latter, I and Q signals are generated by modulating the LO signal with a step of(2π/N). The phase detection error is below 0.5° by using either of them.
  • 加载中
  • [1] . LIU Yong-Tan et al. Radar Imagery Technology. Harbin:Harbin Institute of Technology Press, 1999(in Chinese)(刘永坦等著.雷达成像技术.哈尔滨:哈尔滨上业大学出版社,1999)2. Ellingson S W. Correcting I-Q Imbalance in Direct Conversion Receivers
  • 加载中

Get Citation
LIU Yi-Lei, WANG Guang-Wei and WANG Fang. I/Q Methods Applied to Phase Detection of RF Signals[J]. Chinese Physics C, 2006, 30(8): 780-783.
LIU Yi-Lei, WANG Guang-Wei and WANG Fang. I/Q Methods Applied to Phase Detection of RF Signals[J]. Chinese Physics C, 2006, 30(8): 780-783. shu
Milestone
Received: 2005-11-02
Revised: 2005-11-28
Article Metric

Article Views(2581)
PDF Downloads(728)
Cited by(0)
Policy on re-use
To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Email This Article

Title:
Email:

I/Q Methods Applied to Phase Detection of RF Signals

    Corresponding author: LIU Yi-Lei,
  • Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049, China2 Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800, China

Abstract: Phase detection performs a crucial role in the phase control loop of RF signals in accelerators. This paper presents two methods that apply I/Q technique to phase detection of RF signals. The content includes the study of arithmetic and the setup of systems. The methods are as follows: 1. adopting I/Q demodulator, AD card and the technique of digital processing to detect the phase; 2. direct digital I/Q method. In the former, feasible calibration arithmetic against the inherent error of I/Q demodulators is suggested. In the latter, I and Q signals are generated by modulating the LO signal with a step of(2π/N). The phase detection error is below 0.5° by using either of them.

    HTML

Reference (1)

目录

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return