-
In the absence of SES, the AELR by
$ \beta^- $ decay at temperature$ T $ is given by (e.g., Refs. [1-4])$ \lambda_{\rm{AELR}}^0 = \ln2 \sum\frac{(2J_i+1){\rm e}^{\frac{-E_i}{k_{B}T}}}{G(Z, A, T)} \sum\limits_{f} \frac{\xi(\rho, T, Y_e, Q_{ij})}{ft_{ij}}, $
(1) where
$ G(Z, A, T) $ is the nuclear partition function;$ Z, A, T $ are the electric charge on nucleus, mass number, and the temperature, respectively;$ ft_{ij} $ is the comparative half-life connecting states of$ i $ and$ j $ ;$ k_{B} $ is the Boltzmann constant, and$ J_i $ is the spin.$ Q_{ij} $ is the nuclear energy difference between the states of$ i $ and$ j $ , respectively.$ Q_{00} = M_{p}c^2-M_{d}c^2 $ ,$ M_p $ and$ M_d $ are the masses of the parent nucleus and the daughter nucleus, respectively,$ E_i $ and$ E_j $ , are the excitation energies of the$ i $ th and$ j $ th nuclear state. The$ \xi(\rho, T, Y_e, Q_{ij}) $ in Eq.(1) for the AELR by$ \beta^- $ decay is$ \begin{split} \xi(\rho, T, Y_e, Q_{ij}) =& \frac{c^3}{(m_ec^2)^5}\int_1^{Q_{ij}}{\rm d}\varepsilon_e \varepsilon_e(\varepsilon_e^2-1)^{1/2} \\& \times (Q_{ij}-\varepsilon_e)^3\frac{F(Z+1, \varepsilon_e)}{1+\exp[(U_F-\varepsilon_e)/k_{B}T]}, \end{split} $
(2) where
$ F(Z+1, \varepsilon_e) $ is the Coulomb wave correction.$ \varepsilon_e $ is the electron energy, and$ U_F, m_e, p $ are the electron's chemical potential, mass, and momentum, respectively.In the pre-collapse phase, the electron chemical potential is given by [30]
$ U_F = 1.11(\rho_7Y_e)^{1/3}\left[1+\left(\frac{\pi}{1.11}\right)\frac{(k_BT)^2}{(\rho_7Y_e)^{2/3}}\right]^{-1/3}\; \; \rm{MeV} . $
(3) Ref. [38] discussed the beta-decay half-lives of the r-process nuclei with a consideration of the shell and pair effects, as well as the decay energy
$ Q $ . Then, the comparative half-life$ ft_{ij} $ is written as$ \begin{split} \ln(ft_{ij}) =& a_1+\left(\alpha^2Z^2-5+a_2\frac{N-Z}{A}\right)\ln(Q_{if}-a_3\delta) \\& +(a_4\alpha^2Z^2)+\frac{1}{3}\alpha^2Z^2\ln(A)-\alpha Z\pi+S(N, Z), \end{split} $
(4) where the fine structure constant
$ \alpha = 1/137 $ , and$ \delta = (-1)^N+(-1)^Z $ . Taking into account the pairing effects on Q-values, and the shell effects, the correction factor$ S(N, Z) $ is written as [28]$ \begin{split} S(N, Z) =& a_5\exp(-((N-28)^2+(N-20)^2)/12)\\& +a_6\exp(-((N-50)^2+(N-38)^2)/43)\\ &+a_7\exp(-((N-82)^2+(N-50)^2)/13)\\& +a_8\exp(-((N-82)^2+(N-58)^2)/24)\\& +a_9\exp(-((N-110)^2+(N-70)^2)/244), \end{split} $
(5) where
$ {a_i(i = 1, 2, 3, ...9)} $ are 11.09, 1.07, −0.935, −5.398, 3.016, 3.879, 1.322, 6.030, 1.669, respectively, in Eqs.(4–5). -
The free electron gas is relativistic and completely degenerated in a supernova. The incoming (outgoing) electrons in the EC (beta decay) process mainly originate from near the Fermi surface. Their Fermi energy is
$ E_F>1 $ MeV when the density is$ \rho>10^7\rm{g/cm^3} $ . The screening electrostatic potential in the pre-supernova core is much stronger than the one in the main sequence stars. Based on the ion ball screening model (IBSM), the screening electrostatic potential per electron under the Wigner-Seitz approximation is determined by [20]$ D_1 = 1.784\times10^{-5}\left(\frac{Z^{5/3}}{AY_e^{2/3}}\right)\rho^{1/3}\; \; \; \rm{MeV}. $
(6) Due to the SES effect, the beta decay Q-value will change by a factor of (e.g., Refs. [1, 2])
$ \Delta Q\approx 2.940\times10^{-5}Z^{2/3}(\rho Y_e)^{1/3}\; \; \; \rm{MeV}. $
(7) Therefore, the Q-value of beta decay changes from
$ Q_{if} $ to$ Q_{if}^s({\rm I}) = Q_{if}-\Delta Q $ .We can not neglect the SES influence at high density, as the screening energy is high. The electron energy will change from
$ \varepsilon_e $ to$ \varepsilon^{s}_e({\rm I}) = \varepsilon_e+D_1 $ in the beta decay. Due to SES, the threshold energy for the beta decay decreases from$ Q_{if} $ to$ Q_{if}^s({\rm I}) = Q_{if}-\Delta Q $ . The$ \xi(\rho, T, Y_e, Q_{ij}) $ in Eq. (2) is also replaced by$ \xi^s(\rho, T, Y_e, Q^s_{ij}(\rm{I})) $ , given by$ \begin{split} \xi^s(\rho, T, Y_e, Q_{ij}^s)(\rm{I}) =& \frac{c^3}{(m_ec^2)^5}\int_{1+D_1}^{Q_{ij}^s(\rm{II})+D_1}{\rm d}\varepsilon_e^s \varepsilon_e^s\\ &\times((\varepsilon^s_e)^2-1)^{1/2}(Q^s_{ij}-\varepsilon_e^s)^3\\ &\times \frac{F(Z+1, \varepsilon_e^s)}{1+\exp[(U_F-\varepsilon_e^s)/k_{B}T]}. \end{split} $
(8) Therefore, according to Eq. (1), the AELR by beta decay in the SES is given by
$ \lambda_{\rm AELR}^s({\rm I}) = \ln2 \sum\frac{(2J_i+1){\rm e}^{\frac{-E_i}{k_{B}T}}}{G(Z, A, T)} \sum\limits_{{f}} \frac{\xi^s(\rho, T, Y_e, Q^s_{ij})}{ft^s_{ij}}, $
(9) where
$ ft^s_{ij} $ is the half-life in the SES$ \begin{split} \ln(ft^s_{ij})(\rm{I}) =& a_1+\left(\alpha^2Z^2-5+a_2\frac{N-Z}{A}\right)\ln(Q^s_{if}-a_3\delta)\\& +(a_4\alpha^2Z^2)+\frac{1}{3}\alpha^2Z^2\ln(A)-\alpha Z\pi+S(N, Z). \end{split} $
(10) -
Itoh et al. [40] investigated the influence of the screening potential on EC by the linear-response theory model (LRTM). The condition is
$ T\ll T_F = 5.930\times10^9\left\{\left[1+1.018\left(\frac{Z}{A}\right)^{2/3}(10\rho_7)^{2/3}\right]^{1/2}-1\right\}, $
(11) where
$ T_{\rm{F}} $ is the electron Fermi temperature, and$ \rho_7 $ is the mass density in units of$ 10^7\rm{g/cm^3} $ .The static longitudinal dielectric function has been discussed by Jancovici et al. [41] for relativistic degenerate of electron fluid. Because of the SES effect, the electron potential energy is given by
$ V(r) = -\frac{Ze^2(2k_{\rm F})}{2k_{\rm F}r}\frac{2}{\pi}\int_0^\infty \frac{\sin[(2k_{\rm F}r)]q}{q\epsilon(q, 0)}{\rm d}q, $
(12) where
$ k_{\rm{F}} $ is the electron Fermi wave-number, and$ \epsilon(q, 0) $ is Jancovici's static longitudinal dielectric function.According to the linear response theory, the screening potential is determined by
$ D_2 = 7.525\times10^{-3}Z\left(\frac{10Z\rho_7}{A}\right)^{\frac{1}{3}}J(r_s, R) ~(\rm{MeV}), $
(13) where the parameters
$ J(r_s, R) $ ,$ r_s $ , and$ R $ are given in Ref. [40]. Eq. (13) and$ 10^{-5}\leqslant r_s \leqslant 10^{-1}, 0\leqslant R\leqslant 50 $ are fulfilled in the pre-supernova environment.It is well known that the SES also plays a key role in determining the thermodynamical properties at high density plasma surrounding [42]. When one includes the contribution of the SES, the chemical potential for nuclei is given by
$ U_F^s = U_F^0+U_{iC}, $
(14) where
$ U_F^0 $ is the chemical potential in the absence of Coulomb effects, and$ \Delta U_F $ is the contribution to the chemical potential due to the interaction of the nuclei$ i $ with the electron background.Because the stellar core can comprise multi-component plasma, all the thermodynamic quantities are computed as the sum of the individual quantities for each species. If one further assumes that the electron distribution is not affected by the presence of the nuclear charges (uniform background approximation), the correction from Coulomb chemical potential of the nuclei
$ i $ is given by [32]$ U_{iC} = kTf_C(\Gamma_i), $
(15) where
$ k $ is Boltzmanns constant,$ f_C $ , and$ \Gamma_i = Z_i^{5/3}\Gamma_e $ are the Coulomb free energy per ion in units of$ kT $ , and the ion-coupling parameter, respectively.$ \Gamma_e = e^2/a_ekT $ , and$ a_e = (3/(4\pi n_e))^{1/3} $ is the electron sphere radius, while$ n_e $ depicts the electron number density.According to the discussions for the Coulomb free energy, we will use the expression of (e.g., [36, 37])
$ f_C(\Gamma) = -\Gamma_e\frac{c_{\rm{DH}}\sqrt{\Gamma_e}+ac_{\rm{TF}}\Gamma_e^\nu g_1(r_s)h_1(x)}{1+[b\sqrt{\Gamma_e}+ag_2(r_s)\Gamma_e/r_s]h_2(x)}, $
(16) where the parameter
$ c_{\rm{DH}} = \frac{Z}{\sqrt{3}}[(1+Z)^{3/2}-Z^{3/2}-1], $
(17) and the parameter
$ c_{\rm{TF}} $ determines the screening in the limit of large$ \Gamma_e $ and small$ r_s $ , given by$ c_{\rm{TF}} = c_{\infty}Z^{7/3}[1-Z^{-1/3}+0.2Z^{-1/2}], $
(18) where
$ c_{\infty} = 0.253 $ is consistent with the Thomas-Fermi approximation [20], and the parameters$ a = 1.11Z^{0.475} $ ,$ b = 0.2+0.078(\ln Z)^2 $ , and$ \nu = 1.16+0.08\ln(Z) $ . The functions$ g_1(r_s) $ and$ g_2(r_s) $ are written as$ g_1(r_s) = 1+\frac{0.78}{21+\Gamma_e(Z/r_s)^3}\left(\frac{\Gamma_e}{Z}\right)^{1/2}, $
(19) and
$ g_2(r_s) = 1+\frac{Z-1}{9}\left(1+\frac{1}{0.001Z^2+2\Gamma_e}\right)\frac{r_s^3}{1+6r_s^2}, $
(20) respectively. In Eq. (16), the factor
$ h_1(x) = $ $ [1+(V_F/c)^6Z^{-1/3}]^{-1} $ , where$ x = P_F/(m_ec) $ , and$ P_F, m_e, c $ are the zero-temperature Fermi momentum of electrons, electron mass, and the speed of light, respectively. Here$ V_F = cx/\sqrt{1+x^2} $ is the electron Fermi velocity, and$ h_2(x) = (1+x^2)^{-1/2} $ is the relativistic correction that may be omitted when$ x\ll 1 $ .The Coulomb corrections contribute to changing the threshold energy in beta decay by
$ \Delta Q^s_{if}({\rm II}) = U_{C}(Z+1)-U_C(Z). $
(21) Thus, the beta-decay threshold energy becomes
$ Q^s_{if}({\rm II}) = Q^{ss}_{if} = Q_{if}+\Delta Q^s_{if}(\rm{II}). $
(22) Due to the SES, the electron energy increases from
$ \varepsilon_e $ to$ \varepsilon^{s}_e({\rm II}) = \varepsilon^{ss}_e = \varepsilon_e+D $ in beta decay, and the threshold energy decreases from$ Q_{if} $ to$ Q^{ss}_{if} $ . The chemical potential also changes from$ U_F $ to$ U^s_F $ , and$ \xi(\rho, T, Y_e, Q_{ij}) $ is replaced by$ \xi^{ss}(\rho, T, Y_e, Q^{ss}_{ij})(\rm{II}) $ in Eq. (2). Thus, we have$ \begin{split} \xi^{ss}(\rho, T, Y_e, Q_{ij}^{ss})(\rm{II}) =& \frac{c^3}{(m_ec^2)^5}\int_{1+D_2}^{Q_{ij}^{ss}+D_2}{\rm d}\varepsilon_e^{ss} \varepsilon_e^{ss} \\ &\times((\varepsilon^{ss}_e)^2-1)^{1/2}(Q^{ss}_{ij}-\varepsilon_e^{ss})^3\\& \times\frac{F(Z+1, \varepsilon_e^{ss})}{1+\exp[(U^s_F-\varepsilon_e^{ss})/k_{B}T]}.\end{split} $
(23) According to Eq. (1), the AELR by beta decay in the SES is given by
$ \lambda_{\rm{AELR}}^s({\rm II}) = \ln2 \sum\frac{(2J_i+1){\rm e}^{\frac{-E_i}{k_{B}T}}}{G(Z, A, T)} \sum\limits_{f} \frac{\xi^{ss}(\rho, T, Y_e, Q^{ss}_{ij})}{ft^{ss}_{ij}(\rm{II})}, $
(24) where the half-life
$ ft^{ss}_{ij} $ in the SES for the model (II) is$ \begin{split} \ln(ft^{ss}_{ij}(\rm{II})) =& a_1+\left(\alpha^2Z^2-5+a_2\frac{N-Z}{A}\right)\ln(Q^{ss}_{if}-a_3\delta)\\ &+(a_4\alpha^2Z^2)+\frac{1}{3}\alpha^2Z^2\ln(A)-\alpha Z\pi+S(N, Z). \end{split} $
(25) For the purpose of numerical simulation, we define a SES enhancement factor
$ C $ , which is expressed as$ C(i) = \frac{\lambda_{\rm{AELR}}^s(i)}{\lambda_{\rm{AELR}}^0}\; \; (i = 1, 2), $
(26) where
$ i = 1, 2 $ correspond to model (I) and model (II), respectively. -
Figures 1and 2 show the ratios of
$ \bigtriangleup Q/U_F $ and ($ D/U_F $ ) as a function of electron density$ \rho_7 $ for the model (I). We find that$ \bigtriangleup Q/U_F $ , and ($ D/U_F $ ) decrease significantly as the density increases. However, there is a small effect on$ \bigtriangleup Q/U_F $ when$ \rho_7>10 $ from Fig. 1(a). Therefore, the beta decay with a low threshold energy is easier to change than that at higher density environment. Figure 1(b) also shows that$ D/U_F $ decreases with the density, and that it is hardly related with the matter density when$ \rho_7>10^2 $ . For example,$ D/U_F $ for 56Fe is 0.03281, 0.02243, 0.01847, 0.01735 at$ \rho_7 = 10, 10^2, 10^3, 10^4 $ , respectively, as shown in Fig. 1. Therefore, the AELR at higher density may be less dependent on the matter density in the SES.Figure 1. (color online)
$ \bigtriangleup Q/U_F $ ratio for Q-value correction, and electron Fermi energy as a function of electron density$ \rho_7 $ at several typical temperature points for the model (I).Figure 2. (color online)
$ D/U_F $ ratio for screening potential, and electron Fermi energy correction as a function of electron density$ \rho_7 $ at several typical temperature points for model (I).Figures 3 and 4 show the ratios
$ \bigtriangleup Q/U_F^s $ , and ($ D/U_F^s $ ) as a function of the electron density$ \rho_7 $ for the model (II).$ \bigtriangleup Q/U_F^s $ , and ($ D/U_F^s $ ) likewise decrease significantly as the density increases. However, there is little effect on$ \bigtriangleup D/U_F^s $ when$ \rho_7>10 $ at a relatively higher temperature (e.g.,$ T_9\geqslant 5.33 $ ), as shown in Fig. 4. Higher temperatures lead to larger electron energy. The higher the density, the lager the electron chemical potential becomes. According to Eqs. (8, 13–19), the screening effect on$ D/U_F^s $ may not strongly depend on the mass density when$ \rho_7>10 $ . However, the screening affects$ \bigtriangleup Q/U_F^s $ significantly, as shown in Fig. 3.Figure 3. (color online)
$ \bigtriangleup Q/U_F $ ratio for the corrections of Q-value, and electron Fermi energy as a function of electron density$ \rho_7 $ at several typical temperature points for model (II).Figure 4. (color online)
$ D/U_F $ ratio for the correction of screening potential, and electron Fermi energy as a function of electron density$ \rho_7 $ at several typical temperature points for model (II).The screening factors
$ C $ as a function of$ \rho_7 $ for the models (I) and (II) are shown in Figs. 5–8 at different densities and temperatures. The effect of the SES on$ C $ decreases as the temperature increases for a given density. For example, at$ \rho_7 = 10^3 $ for model (I), the maximum$ C $ for 56Ni decreases from 7.272 to 1.014, as shown in Fig. 5, and from 33.14 to 4.319 as shown in Fig. 8 for model (II).Figure 5. (color online) Screening enhancement factor C by beta decay of 56V, 56Cr, 56Mn, 56Fe, 56Co, and 56Ni as a function of electron density
$ \rho_7 $ at relatively lower ($ T_9 = 1.33, 5.33 $ ) and medium temperatures ($ T_9 = 7.33, 9.33 $ ) for model (I).Figure 8. (color online) Screening enhancement factor C by beta decay of 56V, 56Cr, 56Mn, 56Fe, 56Co, and 56Ni as a function of electron density
$ \rho_7 $ at relatively high temperature range ($ T_9>11 $ ) for model (II).At relatively low (
$ T_9 = 1.33, 5.33 $ ) and moderate temperatures ($ T_9 = 7.33, 9.33 $ ), we compare the results of Figs. 5 and 6. Herein, the factor$ C $ in model (II) is significantly larger than that of model (I). For example,$ C $ for 56V has a value of 4.955 in model (I), whereas it has a value of 651.9 in model (II) at$ T_9 = 1.33 $ . The same conclusions can be derived from Figs. 7 and 8 for higher temperatures. We compare the calculations for Figs. 5 and 6 with those of Figs. 7 and 8 for model (I) and (II). Finally we conclude that the lower the temperature, the smaller the electron kinetic energy becomes. Hence, the SES effect on$ C $ and AELR is large.Figure 6. (color online) Screening enhancement factor C by beta decay of 56V, 56Cr, 56Mn, 56Fe, 56Co, and 56Ni as a function of electron density
$ \rho_7 $ at relatively lower ($ T_9 = 1.33, 5.33 $ ) and medium temperatures ($ T_9 = 7.33, 9.33 $ ) for model (II).Figure 7. (color online) Screening enhancement factor C by beta decay of 56V, 56Cr, 56Mn, 56Fe, 56Co, and 56Ni as a function of electron density
$ \rho_7 $ at relatively high temperature range ($ T_9>11 $ ) for model (I).Judging from the influence of SES on nuclear physics and nuclear structure, the electron screening potential can significantly increase the energy of outgoing electrons during the beta decay process. In addition, the SES can also increase the energy of individual particles, whereas it relatively decreases the threshold needed for beta decay reactions because of the increase in the number of high-energy electrons. Indeed, the SES greatly accelerates the progress of beta decay.
Tables 1–4 show our results in terms of the screening enhancement factor
$ C $ . The AELR increases greatly due to SES from the information provided by$ C $ , especially for model (II). Tables 1 and 2 show the maximum value of the screening factor for 56V, 56Cr, 56Mn, 56Fe, 56Co, and 56Ni at several medium temperatures for model I and II. For example, at$ T_9 = 5.33, Y_e = 0.46 $ the maximum value of enhancement factor$ C $ for 56V, 56Cr, 56Mn, 56Fe, 56Co, and 56Ni are 1.473, 1.381, 1.266, 1.222, 1.223, 1.213 for model (I), whereas they are 209.3, 81.98, 44.58, 43.12, 47.02, 44.26 for model (II), respectively.nuclei T9 = 1.33, Ye = 0.47 T9 = 5.33, Ye = 0.46 T9 = 7.33, Ye = 0.45 T9 = 9.33, Ye = 0.44 ρ7 C(max) ρ7 C(max) ρ7 C(max) ρ7 C(max) 56V 1712 4.955 1221 1.473 1161 1.277 1071 1.172 56Cr 1271 4.584 650.7 1.381 520.6 1.197 440.5 1.091 56Mn 10000 5.208 260.4 1.266 270.4 1.141 340.4 1.064 56Fe 10000 6.532 10000 1.222 10000 1.126 10000 1.087 56Co 10000 7.257 10000 1.223 10000 1.122 670.8 1.126 56Ni 10000 7.272 150.2 1.213 150.2 1.098 10000 1.041 Table 1. Maxima of strong screening enhancement factor C at several typical temperatures within the medium temperature range for model (I).
nuclei T9 = 1.33, Ye = 0.47 T9 = 5.33, Ye = 0.46 T9 = 7.33, Ye = 0.45 T9 = 9.33, Ye = 0.44 ρ7 C(max) ρ7 C(max) ρ7 C(max) ρ7 C(max) 56V 1391 651.9 1411 209.3 1422 38.45 1331 11.45 56Cr 810.9 298.2 780.9 81.98 10000 23.66 10000 17.00 56Mn 330.4 64.80 4455 44.58 10000 46.70 10000 33.67 56Fe 1772 46.38 3564 47.12 8509 47.63 10000 41.34 56Co 1452 46.74 2883 47.02 7277 47.31 10000 44.65 56Ni 1703 40.90 3093 44.26 6527 46.85 10000 44.66 Table 2. Maxima of strong screening enhancement factor C at several typical temperatures within the medium temperature range for model (II).
nuclei T9 = 11.33, Ye = 0.43 T9 = 17.33, Ye = 0.42 T9 = 19.33, Ye = 0.41 T9 = 29.33, Ye = 0.40 ρ7 C(max) ρ7 C(max) ρ7 C(max) ρ7 C(max) 56V 10000 7.286 10000 4.087 10000 3.523 10000 2.196 56Cr 10000 11.86 10000 5.343 10000 4.447 10000 2.492 56Mn 10000 21.91 10000 8.139 10000 6.501 10000 3.205 56Fe 10000 29.16 10000 11.86 10000 9.745 10000 5.622 56Co 2382 32.37 5526 26.01 6326 24.24 10000 15.86 56Ni 10000 33.14 10000 12.49 10000 9.746 10000 4.319 Table 4. Maxima of strong screening enhancement factor C at several typical temperatures in the relatively high temperature range for model (II).
The results of
$ C $ at relatively higher temperatures are presented in Tables 3 and 4. We find that there is small enhancement in$ C $ at the higher temperature. For example, the maximum value of the enhancement factor$ C $ is 1.099 (e.g., for 56V) in Table 3, whereas is 33.14 (e.g., for 56Ni) in Table 4. This is because the higher the temperature leads to a larger electron energy at a given density. The effect of the SES on beta decay may be weakened due to higher electron energy.nuclei T9 = 11.33, Ye = 0.43 T9 = 17.33, Ye = 0.42 T9 = 19.33, Ye = 0.41 T9 = 29.33, Ye = 0.40 ρ7 C(max) ρ7 C(max) ρ7 C(max) ρ7 C(max) 56V 991.1 1.099 1542 1.004 10000 1.001 10000 1.001 56Cr 410.5 1.024 10000 1.002 10000 1.002 10000 1.002 56Mn 460.6 1.021 10000 1.005 10000 1.004 10000 1.003 56Fe 10000 1.067 10000 1.040 10000 1.036 10000 1.023 56Co 1171 1.126 2833 1.099 3413 1.089 6486 1.047 56Ni 10000 1.025 10000 1.009 10000 1.007 10000 1.003 Table 3. Maxima of strong screening enhancement factor C at several typical temperatures in the relatively high temperature range for model (I).
To summarize the above analysis, the
$ C $ and AELR are both influenced greatly by the SES as the density increases, as seen in Figs. 5-8. This is because the SES has a strong influence on the Q-value of the beta decay. As the density increases,$ D/U_F $ and$ \bigtriangleup Q/U_F $ decrease. However, they have little relation with mass density when$ \rho_7>10^2 $ , as shown in Figs. 1–4. The AERL is also strongly dependent on the beta decay Q-value. The higher the energy of the outgoing electron, the larger the AERL becomes, in the case where the electron energy is higher than the threshold energy.For model (I), the SES significantly alters the Q-value, the electron energy, and the half-life for the beta decay. According to Eqs. (7) and (10), due to the Q-value correction, the comparative half-life increases with the increase the Q-value. Because of the interactions among the electrons in plasma, the nuclear binding energy decreases. The effective nuclear Q-value (
$ Q_{\rm{if}} $ ) varies at high density because of the effect of the charge dependence on the binding energy. Based on Eqs. (8) and (9), the beta decay increases due to the SES.For model (II), we discuss the influence of the SES on the enhancement factor and AERL by beta decay, by considering the corrections of the Q-value, electron energy, and the half-life, as well as the electron chemical potential. According to Eqs. (13–22, 25), the half-life and electron chemical potential increase due to the the Q-value correction in the SES. The nuclear binding energy also decreases due to interactions with the dense electron gas in the SES. Based on Eqs. (13–24), the beta decay increases greatly due to the SES. Comparison of the results of model (I) with those of model (II), as shown in Figs. 5-8, shows that an improved estimation of the SES for AERL is given in the model (II).
In contrast, the pairing effect and Q-values with the neutron number of the parent nuclei play key roles in the
$ \beta^- $ decay reaction. For instance, the half-lives with Q-values are strongly influenced by them. As shown in Fig. 2 of Ref. [36], when the number of neutrons increases, the comparative half-live decreases, whereas the Q-value increases.The shell and pairing effects are very important in the nuclear structure. Some information on the pairing effects on
$ \beta^- $ decay half-lives and Q-values is described by the parameter$ \delta $ . When the number of nuclear neutrons increases, the beta decay reaction can be more active because of the pairing effect. Thus, the AERL increases.Because of the quantum effect, the shell effect strongly changes the nuclear structure and influences the
$ \beta^- $ decay comparative half-lives. A complete correction of shell effects should include all major shell, as well as sub-shell closures. A reasonable approximation is given by Eq. (4), when we consider the shell effects and pairing effects.Based on Eqs. (7) and (10) for the model (I) (Eqs. (15–22) and Eq. (25) for the model (II)), the SES influences the Q-value and decay half-lives. From Figs. 1–4, we find that the enhancement factor
$ C $ rises and falls because of to the shell effects and the pairing effect in the SES, as well as the corrections of the Q-value.
Strongly screening β− decay antineutrino energy loss in presupernova
- Received Date: 2018-12-03
- Accepted Date: 2019-03-26
- Available Online: 2019-06-01
Abstract: In this study, we investigate the ion-ball screening model (model (I)), focused on the screening electrostatic potential per electron under the Wigner-Seitz approximation and the Q-value correction. By considering the changes of the Coulomb free energy and the effects of strong electron screening (SES) on the Q-value and the Coulomb chemical potential, we discuss the linear-response screening model (model (II)). We also analyze the influence of the SES on the