PEPX-type lattice design and optimization for the High Energy Photon Source

JIAO Yi; XU Gang

doi:10.1088/1674-1137/39/6/067004

Chinese Physics C> 2015, Vol. 39> Issue(6) : 067004 DOI: 10.1088/1674-1137/39/6/067004

PEPX-type lattice design and optimization for the High Energy Photon Source

JIAO Yi ,
XU Gang

Abstract
HTML
Reference
Related

PDF

Abstract：
A new generation of storage ring-based light sources, called diffraction-limited storage rings (DLSR), with emittance approaching the diffraction limit for multi-keV photons by using multi-bend achromat lattice, has attracted worldwide and extensive studies of several laboratories, and been seriously considered as a means of upgrading existing facilities in the imminent future. Among various DLSR proposals, the PEPX design demonstrated that it is feasible to achieve sufficient ring acceptance for off-axis injection in a DLSR, by designing the lattice based on the ‘third-order achromat’ concept and with a special high-beta injection section. For the High Energy Photon Source (HEPS) planned to be built in Beijing, a PEPX-type lattice has been designed and continuously improved. In this paper, we report the evolution of the PEPX-type design for HEPS, and discuss the main issues relevant to the linear optics design and nonlinear optimization.

References

[1]

Hettel R. Journal of Synchrotron Radiation, 2014, 21: 843-855[2] Wiedemann H. Particle Accelerator Physics. Berlin: Springer, 2007. 389-407[3] Smith S L. In: Proc. of the EPAC2002. La Villette-Paris, 2002. 44[4] CAI Y, Bane K, Hettel R et al. Phys. Rev. ST Accel. Beams, 2012, 15: 054002[5] JIANG Xiao-Ming et al. BAPS Preliminary Design Report, Internal Report. Beijing: Institute of High Energy Physics, CAS, 2012 (in Chinese)[6] XU Gang, JIAO Yi. Chin. Phys. C, 2013, 37(5): 057003[7] JIAO Y, CAI Y, CHAO A W. Phys. Rev. ST Accel. Beams, 2011, 14: 054002[8] Leemann S C, Andersson , Eriksson M et al. Rev. ST Accel. Beams, 2009, 12: 120701[9] Borland M, Decker G, Emery L et al. Journal of Synchrotron Radiation, 2014, 21: 912-936[10] XU GANG. BAPS Lattice Design, In: the Workshop on Accelerator RD for Ultimate Storage Rings, Beijing, 2012[11] Farvacque L, Carmignani N, Chavanne J et al. In: Proc. of IPAC2013. Shanghai, 2013. 79[12] Laskar J. Icarus, 1990, 88: 266[13] Deb K. et al. IEEE Transactions on Evolutionary Computation, 2002, 6(2): 182-197

[1]	Chun-Jie Wang , Zhen-An Liu , Jing-Zhou Zhao , Zhao Liu . Design of a high throughput electronics module for high energy physics experiments. Chinese Physics C, 2016, 40(6): 066102. doi: 10.1088/1674-1137/40/6/066102
[2]	Gang Xu , Yi Jiao , Yue-Mei Peng . ESRF-type lattice design and optimization for the High Energy Photon Source. Chinese Physics C, 2016, 40(2): 027001. doi: 10.1088/1674-1137/40/2/027001
[3]	WANG Jia-Jia , YE Mao , SHI Tan , CHANG Rui , QIAO Shan . Design of a high flux VUV beamline for low energy photons. Chinese Physics C, 2015, 39(4): 048001. doi: 10.1088/1674-1137/39/4/048001
[4]	LI He-Ting , JIA Qi-Ka . Optimization of single-step tapering amplitude and energy detuning for high-gain FELs. Chinese Physics C, 2015, 39(1): 018101. doi: 10.1088/1674-1137/39/1/018101
[5]	YANG Lei , QIN Bin , YANG Jun , LIU Xia-Ling , TAN Ping , HU Tong-Ning . Optimization of the lattice function in the planar undulator applied for terahertz FEL oscillators. Chinese Physics C, 2014, 38(3): 037004. doi: 10.1088/1674-1137/38/3/037004
[6]	WANG Yi-Wei , SCHULTE Daniel , GAO Jie . Main linac lattice design and optimization for E_cm=1 TeV CLIC. Chinese Physics C, 2014, 38(6): 067009. doi: 10.1088/1674-1137/38/6/067009
[7]	YANG Liu , LU Xiang-Yang , QUAN Sheng-Wen , YAO Zhong-Yuan , LUO Xing , ZHOU Kui . Electromagnetic design and optimization of a superconducting quarter wave resonator. Chinese Physics C, 2013, 37(2): 027001. doi: 10.1088/1674-1137/37/2/027001
[8]	WANG Dou , GAO Jie , XIAO Ming , GENG Hui-Ping , GUO Yuan-Yuan , XU Shou-Yan , WANG Na , AN Yu-Wen , QIN Qing , XU Gang , WANG Sheng . Optimization parameter design of a circular e⁺e^- Higgs factory. Chinese Physics C, 2013, 37(9): 097003. doi: 10.1088/1674-1137/37/9/097003
[9]	BAI Zheng-He , WANG Lin , JIA Qi-Ka , LI Wei-Min . Lattice optimization for the HLS-Ⅱ storage ring. Chinese Physics C, 2013, 37(1): 017001. doi: 10.1088/1674-1137/37/1/017001
[10]	XU Gang , JIAO Yi . Towards the ultimate storage ring: The lattice design forBeijing Advanced Photon Source. Chinese Physics C, 2013, 37(5): 057003. doi: 10.1088/1674-1137/37/5/057003
[11]	LU Bo , CUI Wei-Wei , WANG Yu-Sa , ZHU Yue , ZHANG Yi , XU Yu-Peng , CHEN Yong , HUO Jia , LI Wei , HAN Da-Wei , LI Mao-Shun , YANG Yan-Ji , WANG Juan , CHEN Tian-Xiang , HU Wei , LI Cheng-Kui , LIU Xiao-Yan . Design and optimization of the readout system for X-ray CCDs. Chinese Physics C, 2012, 36(9): 846-850. doi: 10.1088/1674-1137/36/9/009
[12]	GAO Wei-Wei , WANG Lin , LI Wei-Min , HE Duo-Hui . Low emittance lattice optimization using a multi-objective evolutionary algorithm. Chinese Physics C, 2011, 35(9): 859-864. doi: 10.1088/1674-1137/35/9/014
[13]	WANG Zhi-Jun , HE Yuan , WU Wei , YANG Ya-Qing , XIAO Chen . Design optimization of the APF DTL in the SSC-linac. Chinese Physics C, 2010, 34(10): 1639-1642. doi: 10.1088/1674-1137/34/10/017
[14]	TIAN Shun-Qiang , LIU Gui-Min , HOU Jie , CHEN Guang-Ling , CHEN Sen-Yu . Improved nonlinear optimization in the storage ring of the modernsynchrotron radiation light source. Chinese Physics C, 2009, 33(1): 65-73. doi: 10.1088/1674-1137/33/1/014
[15]	MAO Cheng-Wen , XI Zai-Jun , YU Xiao-Han , XIAO Ti-Qiao . Design optimization of a tapered mirror for microfocusing optics. Chinese Physics C, 2009, 33(8): 687-690. doi: 10.1088/1674-1137/33/8/017
[16]	SHAN Lian-Qiang , WU Feng-Juan , GUAN Hui-Jun , ZHANG Jing-Bo , TANG Gui-Xin , HUO Lei . Size of the freeze-out source in high energy heavy ion collisions. Chinese Physics C, 2009, 33(5): 359-363. doi: 10.1088/1674-1137/33/5/008
[17]	LI Jin-Hai , OUYANG Hua-Fu , FU Shi-Nian , ZHANG Hua-Shun , HE Wei . Design of the low energy beam transport line for the China spallation neutron source. Chinese Physics C, 2008, 32(3): 227-231. doi: 10.1088/1674-1137/32/3/014
[18]	ZHANG He , WANG Lin , HE Duo-Hui . Design of the HLS High Brilliance Lattice. Chinese Physics C, 2006, 30(S1): 138-140.
[19]	Liu Yiming , Huo Lei , Jiang Yuzhen , Wang Shan , D. Keane , S. Y. Fung , S. Y. Chu . Source Density Distribution and Intensity Interferometry in High-energy Heavy-ion Collisions. Chinese Physics C, 1991, 15(S1): 33-41.
[20]	Pei Guoxi , Xie Jialin , Zhou Shu , Sun Songlan . Optimization of the BEPC Positron Source. Chinese Physics C, 1990, 14(S2): 125-134.

Access

Get Citation

JIAO Yi and XU Gang. PEPX-type lattice design and optimization for the High Energy Photon Source[J]. Chinese Physics C, 2015, 39(6): 067004. doi: 10.1088/1674-1137/39/6/067004

JIAO Yi and XU Gang. PEPX-type lattice design and optimization for the High Energy Photon Source[J]. Chinese Physics C, 2015, 39(6): 067004. doi: 10.1088/1674-1137/39/6/067004 shu

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2014-11-24
Revised: 1900-01-01

Article Metric

Article Views(3233)
PDF Downloads(127)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

PEPX-type lattice design and optimization for the High Energy Photon Source

Received Date: 2014-11-24

Accepted Date: 1900-01-01

Available Online: 2015-06-05

Abstract: A new generation of storage ring-based light sources, called diffraction-limited storage rings (DLSR), with emittance approaching the diffraction limit for multi-keV photons by using multi-bend achromat lattice, has attracted worldwide and extensive studies of several laboratories, and been seriously considered as a means of upgrading existing facilities in the imminent future. Among various DLSR proposals, the PEPX design demonstrated that it is feasible to achieve sufficient ring acceptance for off-axis injection in a DLSR, by designing the lattice based on the ‘third-order achromat’ concept and with a special high-beta injection section. For the High Energy Photon Source (HEPS) planned to be built in Beijing, a PEPX-type lattice has been designed and continuously improved. In this paper, we report the evolution of the PEPX-type design for HEPS, and discuss the main issues relevant to the linear optics design and nonlinear optimization.

HTML

Reference (1)

PEPX-type lattice design and optimization for the High Energy Photon Source

Abstract：

References

Access

Article Metrics

Metrics

通讯作者: 陈斌, bchen63@163.com

Email This Article

PEPX-type lattice design and optimization for the High Energy Photon Source

HTML

目录