Modeling and analysis of SLED

LI Lin; FANG Wen-Cheng; WANG Chao-Peng; GU Qiang

doi:10.1088/1674-1137/39/4/047002

Chinese Physics C> 2015, Vol. 39> Issue(4) : 047002 DOI: 10.1088/1674-1137/39/4/047002

Modeling and analysis of SLED

Abstract
HTML
Reference
Related

PDF

Abstract：
SLED (SLAC Energy Doubler) is a crucial component for the C-band microwave acceleration unit of a soft X-ray Free Electron Laser (SXFEL). To study the behavior of SLED, a mathematical model is commonly built and analyzed. In this paper, a new method is proposed to build the model of SLED at the Shanghai Institute of Applied Physics. With this method, the parameters of the two cavities can be analyzed separately. Also it is suitable to study parameter optimization of SLED and analyze the effect from the parameters variations. Simulation results of our method are also presented.

References

[1]

FENG C, ZHAO Z T. Chinses Sci. Bull, 2010, 55: 221-227[2] FANG W C, GU Q et al. Chinese Sci. Bull, 2011, 56: 3420-3425[3] GU P D. Research on New Type RF Pulse Compressor. Doctor Dissertation. IHEP, 1999 (in Chinese)[4] Farkes Z D, Hogg H A, Loew G A et al. SLED: A Method of Doubling SLAC's Energy, SLAC-PUB-1453. June 1974[5] GENG Z Q. Design and Construction of the Phasing System for BEPCII Linac. Doctor Dissertation. IHEP, 2007 (in Chinese)[6] David M. Pozar. Microwave Engineering. Third Edition. Beijing: Publishing Housing of Electronics Industry, 2006. 162-166

Access

Get Citation

LI Lin, FANG Wen-Cheng, WANG Chao-Peng and GU Qiang. Modeling and analysis of SLED[J]. Chinese Physics C, 2015, 39(4): 047002. doi: 10.1088/1674-1137/39/4/047002

LI Lin, FANG Wen-Cheng, WANG Chao-Peng and GU Qiang. Modeling and analysis of SLED[J]. Chinese Physics C, 2015, 39(4): 047002. doi: 10.1088/1674-1137/39/4/047002 shu

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2014-06-05
Revised: 1900-01-01

Article Metric

Article Views(3164)
PDF Downloads(237)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142