Vibration research of the AC dipole-girder system for CSNS/RCS

Get Citation
LIU Ren-Hong, ZHANG Jun-Song, QU Hua-Min, KANG Ling, WANG Mo-Tuo, WANG Guang-Yuan and WANG Hai-Jing. Vibration research of the AC dipole-girder system for CSNS/RCS[J]. Chinese Physics C, 2014, 38(6): 067005. doi: 10.1088/1674-1137/38/6/067005
LIU Ren-Hong, ZHANG Jun-Song, QU Hua-Min, KANG Ling, WANG Mo-Tuo, WANG Guang-Yuan and WANG Hai-Jing. Vibration research of the AC dipole-girder system for CSNS/RCS[J]. Chinese Physics C, 2014, 38(6): 067005.  doi: 10.1088/1674-1137/38/6/067005 shu
Milestone
Received: 2013-07-15
Revised: 1900-01-01
Article Metric

Article Views(1646)
PDF Downloads(206)
Cited by(0)
Policy on re-use
To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Email This Article

Title:
Email:

Vibration research of the AC dipole-girder system for CSNS/RCS

    Corresponding author: LIU Ren-Hong,

Abstract: The China Spallation Neutron Source (CSNS) is a high intensity proton accelerator based facility. Its accelerator complex includes two main parts: an H- linac and a rapid cycling synchrotron (RCS). The RCS accumulates the 80 MeV proton beam and accelerates it to 1.6 GeV, with a repetition rate of 25 Hz. The AC dipole of the CSNS/RCS is operated at a 25 Hz sinusoidal alternating current which causes severe vibration. The vibration will influence the long-term safety and reliable operation of the magnet. The dipole magnet of CSNS/RCS is an active vibration equipment, which is different from the ground vibration accelerator. It is very important to design and study the dynamic characteristics of the dipole-girder system. This paper takes the AC dipole and girder as a specific model system. A method for studying the dynamic characteristics of the system is put forward by combining theoretical calculation with experimental testing. The ANSYS simulation method plays a very important role in the girder structure design stage. With this method, the mechanical resonance phenomenon was avoided in the girder design time. At the same time the dipole vibratory force will influence the other equipment through the girder. Since it is necessary to isolate and decrease the dipole vibration, a new isolator was designed to isolate the vibratory force and decrease the vibration amplitude of the magnet.

    HTML

Reference (1)

目录

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return