Beam transport design for a 1 MeV prototype dielectric wall accelerator

ZHU Jun; ZHANG Huang; PENG Shi-Xiang; REN Hai-Tao; XIA Lian-Sheng; WANG Wen-Dou; YANG Zhi-Yong; SHEN Yi; SHI Jin-Shui; ZHANG Lin-Wen; DENG Jian-Jun

doi:10.1088/1674-1137/38/4/047001

Chinese Physics C> 2014, Vol. 38> Issue(4) : 047001 DOI: 10.1088/1674-1137/38/4/047001

Beam transport design for a 1 MeV prototype dielectric wall accelerator

Abstract
HTML
Reference
Related

PDF

Abstract：
The beam transport design of a novel proton dielectric wall accelerator is introduced in this paper. The protons will be accelerated from 40 keV to nearly 1 MeV under an accelerating gradient that is as high as 20 MV/m. A consideration of the beam line as well as the transport simulation is presented. The influences of the injection timing jitter and the accelerating pulse timing jitter are also discussed.

References

[1]

Wilson R R. Radiology, 1946, 47: 487[2] Koji Noda. Proceedings of IPAC2011. San Sebastian, Spain, 2011, 3784[3] Caporaso G J, Sampayan S, CHEN Y J et al. Proceedings of PAC07. Albuqurque, New Mexico, USA, 2007, 857[4] Humphries S. Principle of Charged Particle Acceleration. University of New Mexico, Albuquerque, NM, 1999. 283[5] ZHU Jun, XIA Lian-Sheng, CHEN Si-Fu et al. High Power Laser and Particle Beams, 2012, 24(6): 1449 (in Chinese)[6] ZHANG Lin-Wen, LAI Qin-Gui, WANG Wen-Dou et al. Proceedings of IPAC2011. San Sebastian, Spain, 2011, 2769[7] CHEN Y J, Caporaso G J, Blackfield D T et al. Proceedings of LINAC2010. Tsukuba, Japan, 2010, 941[8] Zografos A, Brown T, Hening A et al. Proceedings of IPAC2011. San Sebastian, Spain, 2011, 3636

[1]	HUANG Jiang , XIONG Yong-Qian , CHEN De-Zhi , LIU Kai-Feng , YANG Jun , LI Dong , YU Tiao-Qin , FAN Ming-Wu , YANG Bo . A permanent magnet electron beam spread system used fora low energy electron irradiation accelerator. Chinese Physics C, 2014, 38(10): 107008. doi: 10.1088/1674-1137/38/10/107008
[2]	XU Ji-Lei , GUAN Meng-Yun , YANG Chang-Gen , WANG Yi-Fang , ZHANG Jia-Wen , LU Chang-Guo , Kirk McDonald , Robert Hackenburg , Kwong Lau , Logan Lebanowski , Cullen Newsom , Lin Shih-Kai , Jonathan Link , MA Lie-Hua , Viktor Pec , Vit Vorobel , CHEN Jin , LIU Jin-Chang , ZHOU Yong-Zhao , LIANG Hao . Design and preliminary test results of Daya Bay RPC modules. Chinese Physics C, 2011, 35(9): 844-850. doi: 10.1088/1674-1137/35/9/011
[3]	HUANG Wen-Xue , WANG Yue , ZHU Zhi-Chao , TIAN Yu-Lin , XU Hu-Shan , SUN Zhi-Yu , XIAO Guo-Qing , ZHAN Wen-Long . Experimental Study of the High-Voltage Breakdown and Simulations for the RFQ Cooler and Buncher RFQ1L. Chinese Physics C, 2006, 30(S2): 261-264.
[4]	PENG Quan-Ling , SUN Jian , ZHAO Guang-Yuan , SHI Cai-Tu . Principle and Software Design of Helmhotz Coil Measurement System. Chinese Physics C, 2001, 25(9): 920-925.
[5]	Yu Hong , Shen Qixing , Zhang Lin . Angular Distribution of Process e⁺e^－→τ⁺τ^－,τ^－→a₁υτ,a₁→ρπ and Characteristics of a₁ Meson. Chinese Physics C, 1994, 18(7): 583-590.
[6]	WANG Man , LI Jin , CUI Xiang-Zong , XIA Xiao-Mi , LAI Yuan-Fen , YAO Xiao-Guang . PROTOTYPE OF END CAP SHOWER COUNTERAND ITS BEAM TEST. Chinese Physics C, 1987, 11(3): 321-326.

Access

Get Citation

ZHU Jun, ZHANG Huang, PENG Shi-Xiang, REN Hai-Tao, XIA Lian-Sheng, WANG Wen-Dou, YANG Zhi-Yong, SHEN Yi, SHI Jin-Shui, ZHANG Lin-Wen and DENG Jian-Jun. Beam transport design for a 1 MeV prototype dielectric wall accelerator[J]. Chinese Physics C, 2014, 38(4): 047001. doi: 10.1088/1674-1137/38/4/047001

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2013-04-01
Revised: 1900-01-01

Article Metric

Article Views(2965)
PDF Downloads(195)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Beam transport design for a 1 MeV prototype dielectric wall accelerator

Corresponding author: ZHU Jun,

Received Date: 2013-04-01
Accepted Date: 1900-01-01
Available Online: 2014-04-05

Abstract: The beam transport design of a novel proton dielectric wall accelerator is introduced in this paper. The protons will be accelerated from 40 keV to nearly 1 MeV under an accelerating gradient that is as high as 20 MV/m. A consideration of the beam line as well as the transport simulation is presented. The influences of the injection timing jitter and the accelerating pulse timing jitter are also discussed.