Spot size diagnostics for flash radiographic X-ray sources at LAPA

LI Cheng-Gang; LI Qin; SHI Jin-Shui; DENG Jian-Jun

doi:10.1088/1674-1137/33/S2/041

Chinese Physics C> 2009, Vol. 33> Issue(S2) : 157-160 DOI: 10.1088/1674-1137/33/S2/041

Spot size diagnostics for flash radiographic X-ray sources at LAPA

Abstract
HTML
Reference
Related

PDF

Abstract：
Spot size is one of the parameters to characterize the performance of a radiographic X-ray source. It determines the degree of blurring due to magnification directly. In recent years, a variety of measurement methods have been used to diagnose X-ray spot size at Laboratory of Accelerator Physics and Application (LAPA). Computer simulations and experiments showed that using a rolled-edge to measure the spot size are more accurate, and the intensity distribution of X-ray source was obtained by a device with a square aperture. Experimental and simulation results on a flash X-ray source at our laboratory are presented and discussed in this paper. In addition, a new method for time resolved diagnostics of X-ray spot size is introduced too.

References

[1]

. SHI Jin-Shui, DING Bo-Nan, DENG Jian-Jun et al. High Power Laser and Particle Beams, 1997, 8(4): 599-603 (in Chinese)2. DENG Jian-Jun, DING Bo-Nan, WANG Hua-Cen et al.High Power Laser and Particle Beams, 2003, 15(5): 502-504. (in Chinese)3. SHI Jin-Shui, LI Jin, HE Yi et al. High Power Laser and Particle Beams, 1999, 11(2): 177-179 (in Chinese)4. Gideon Barnea, Meir Markovits, Itamar Navon. Proceeding of Beams 2002. Albuquerque, 2002. 171-1745. Richardson R A. Proceeding of 1999 Particle Accelerator.New York, 1999. 2149-2151

Access

Get Citation

LI Cheng-Gang, LI Qin, SHI Jin-Shui and DENG Jian-Jun. Spot size diagnostics for flash radiographic X-ray sources at LAPA[J]. Chinese Physics C, 2009, 33(S2): 157-160. doi: 10.1088/1674-1137/33/S2/041

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2009-01-05
Revised: 1900-01-01

Article Metric

Article Views(3956)
PDF Downloads(595)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Spot size diagnostics for flash radiographic X-ray sources at LAPA

Corresponding author: LI Cheng-Gang,

Received Date: 2009-01-05
Accepted Date: 1900-01-01
Available Online: 2009-01-08

Abstract: Spot size is one of the parameters to characterize the performance of a radiographic X-ray source. It determines the degree of blurring due to magnification directly. In recent years, a variety of measurement methods have been used to diagnose X-ray spot size at Laboratory of Accelerator Physics and Application (LAPA). Computer simulations and experiments showed that using a rolled-edge to measure the spot size are more accurate, and the intensity distribution of X-ray source was obtained by a device with a square aperture. Experimental and simulation results on a flash X-ray source at our laboratory are presented and discussed in this paper. In addition, a new method for time resolved diagnostics of X-ray spot size is introduced too.