Design and simulation of the wire scanner for the injector linac of BEPCⅡ

SUI Yan-Feng; MA Hui-Zhou; CAO Jian-She; MA Li

doi:10.1088/1674-1137/32/5/015

Chinese Physics C> 2008, Vol. 32> Issue(5) : 397-399 DOI: 10.1088/1674-1137/32/5/015

Design and simulation of the wire scanner for the injector linac of BEPCⅡ

Abstract
HTML
Reference
Related

PDF

Abstract：
BEPCⅡ, the upgrade project of Beijing Electron Positron Collider (BEPC), is an accelerator with large beam current and high luminosity, so an efficient and stable injector is required. Several beam diagnostic and monitoring instruments are used. A new diagnostic instrument — wire scanner, has been designed and will be used to measure the profile of the linac beam of BEPCⅡ. This paper describes the prototype of this system and the cause of heat generating of the wire. Some simulation results of the heat and force by using finite element method software—ANSYS^®,2) are presented and discussed.

References

[1]

. Iida N, Suwada T, Funakoshi Y et al. Proceedings of APAC98. Japan, 546-5482. Bailey J L, YANG B X, Buffington T W. Proceedings of PAC 2005. May 16-20, 2005, Knoxville, Tennessee, USA.3667-36693. ValdiviezR et al. Proceedings of PAC2001. June 18-22, 2001Chicago, IL, USA, 1324-13264. XU Ke-Zun. Particle Detection Technology. Shanghai Scientific and Technique Publishers, 1981. 30-32 (in Chinese)5. Hollan F A et al. Heat Transfer. The Design Institute of Jilin Chemical Industry, Translate. Chemical Industry Publisher, 1993. 508-510 (in Chinese)

Access

Get Citation

SUI Yan-Feng, MA Hui-Zhou, CAO Jian-She and MA Li. Design and simulation of the wire scanner for the injector linac of BEPCⅡ[J]. Chinese Physics C, 2008, 32(5): 397-399. doi: 10.1088/1674-1137/32/5/015

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2007-08-01
Revised: 2007-09-03

Article Metric

Article Views(5478)
PDF Downloads(640)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142