Thermal analysis and water-cooling design of the CSNS MEBT 324MHz buncher cavity

LIU Hua-Chang; OUYANG Hua-Fu

doi:10.1088/1674-1137/32/4/008

Chinese Physics C> 2008, Vol. 32> Issue(4) : 280-284 DOI: 10.1088/1674-1137/32/4/008

Thermal analysis and water-cooling design of the CSNS MEBT 324MHz buncher cavity

LIU Hua-Chang ^, ,
OUYANG Hua-Fu

Abstract
HTML
Reference
Related

PDF

Abstract：
At least two bunchers are needed in the 3MeV H^－ Medium Energy Beam Transport (MEBT) line located between RFQ and DTL for the CSNS (China Spallation Neutron Source). A nose-cone geometry has been adopted as the type of buncher cavity for its simplicity, higher impedance and lower risk of multipacting. By making use of the results got from the simulations on the buncher with two-dimension code SUPERFISH, the thermal and structural analyses have been carried out, the process and results to determine the resulting frequency shift due to thermal and structural distortion of the cavity are presented, the water-cooling channel position and the optimum cooling water temperature as well as the tuning method by adjusting the cooling water temperature when the cavity is out of resonance are also determined through the analyses.

References

[1]

. Plostinar C, Clarke-Gayther M. Rebuncher-Bunching RF Cavities and Hybrid Quadrupoles for the RAL Front-Endtest Stand (FETS), Conf-06-003-HIPPI2. William S Janna. Engineering Heat Transfer, SI Edition,Chapter 113. Hartman N, Rimmer R A. Electromagnetic, Thermal, and Structural Analysis of RF Cavities Using ANSYS. Proceeding of 2001 Particle Accelerator Conference. Chicago

[1]	Hong-Juan Zheng , Jie Gao , Zhen-Chao Liu . Cavity and HOM coupler design for CEPC. Chinese Physics C, 2016, 40(5): 057001. doi: 10.1088/1674-1137/40/5/057001
[2]	JIA Huan , HE Yuan , YUAN You-Jin , SONG Ming-Tao , HUANG Shi-Chun , ZHANG Xiang , YUAN Chen-Zhang , NIU Hai-Hua , ZHANG Peng , WU Jun-Xia , ZHANG Yong , KANG Xin-Cai , LUO Chen . Design and construction of the MEBT1 for CADS injector scheme II. Chinese Physics C, 2015, 39(10): 107003. doi: 10.1088/1674-1137/39/10/107003
[3]	LI Han , DAI Jian-Ping , SHA Peng , WANG Qun-Yao , HUANG Hong , LI Li-Hai , ZHANG Juan , MA Qiang , LIN Hai-Ying , SUN Yi , PAN Wei-Min . Development of a 325 MHz β =0.12 superconducting single spoke cavity for China-ADS. Chinese Physics C, 2014, 38(7): 077008. doi: 10.1088/1674-1137/38/7/077008
[4]	PENG Ying-Hua , ZHANG Xin-Ying , LI Han , SHA Peng , Li Zhong-Quan , PAN Wei-Min . Design of a 325 MHz SC Spoke040 cavity at IHEP. Chinese Physics C, 2014, 38(11): 117005. doi: 10.1088/1674-1137/38/11/117005
[5]	SUN Lie-Peng , ZHAO Hong-Wei , SUN Zhou-Ping , HE Yuan , SHI Ai-Min , XIAO Chen , DU Xiao-Nan , ZHANG Cong , ZHANG Zhou-Li . Design study of the SSC-LINAC re-buncher. Chinese Physics C, 2013, 37(2): 027002. doi: 10.1088/1674-1137/37/2/027002
[6]	WANG Hai-Jing , LIU Wei-Bin , QU Hua-Min , ZHU Dong-Hui , HUANG Nan , KANG Ling , LIU Ren-Hong . Thermal analysis and optimization of proton beam window for the CSNS. Chinese Physics C, 2013, 37(7): 077001. doi: 10.1088/1674-1137/37/7/077001
[7]	LIU Zhen-Chao , GAO Jie , LI Zhong-Quan , ZHAI Ji-Yuan , ZHAO Tong-Xian , LI Da-Zhang , LIU Yi-Lin , SUN Yi . ADS 650 MHz medium beta cavity study and design. Chinese Physics C, 2013, 37(1): 017005. doi: 10.1088/1674-1137/37/1/017005
[8]	ZOU Yi-Qing , WANG Na , KANG Ling , QU Hua-Min , HE Zhe-Xi , YU Jie-Bing . Thermal analysis and cooling structure design of the primary collimator in CSNS/RCS. Chinese Physics C, 2013, 37(5): 057004. doi: 10.1088/1674-1137/37/5/057004
[9]	MI Zheng-Hui , SUN Yi , WANG Guang-Wei , PAN Wei-Min , LI Zhong-Quan , DAI Jian-Ping , MA Qiang , LIN Hai-Ying , LIU Ya-Ping , XU Bo , HUANG Hong , WANG Qun-Yao , XU Yu-Fen , ZHAO Guang-Yuan , HUANG Tong-Ming , SHA Peng , MENG Fan-Bo , QIU Feng , LI Han , CHEN Xu , ZHAO Dan-Yang , ZHANG Juan . Horizontal test for BEPCⅡ 500 MHz spare cavity. Chinese Physics C, 2012, 36(10): 996-999. doi: 10.1088/1674-1137/36/10/014
[10]	SUN Xian-Jing , DENG Chang-Dong , KANG Wen . Transient electromagnetic simulation and thermal analysis of the DC-biased AC quadrupole magnet for CSNS/RCS. Chinese Physics C, 2012, 36(5): 443-446. doi: 10.1088/1674-1137/36/5/011
[11]	LU Chang-Wang , LIU Jian-Fei , HOU Hong-Tao , MA Zhen-Yu , MAO Dong-Qing , FENG Zi-Qiang , ZHAO Shen-Jie , LUO Chen , ZHAO Yu-Bin , ZHANG Zhi-Gang , ZHENG Xiang , WEI Ye-Long , YU Hai-Bo , LI Zheng , XU Kai . Design and simulation of a new type of 500 MHz single-cell superconducting RF cavity. Chinese Physics C, 2012, 36(5): 447-451. doi: 10.1088/1674-1137/36/5/012
[12]	ZHOU Quan-Feng , ZHU-Kun , LU Yuan-Rong , GAO Shu-Li , KANG Ming-Lei , YAN Xue-Qing , GUO Zhi-Yu , CHEN Jia-Er . Simulation and experiments of rf tuning of a 201.5 MHz four-rod RFQ cavity. Chinese Physics C, 2011, 35(11): 1042-1046. doi: 10.1088/1674-1137/35/11/012
[13]	LIU Jian , WANG Qing-Bin , WU Qing-Biao , MA Zhong-Jian . Design and analysis of the tunnel connecting the beamcorridor and the spectrum hall of the CSNS. Chinese Physics C, 2011, 35(1): 104-108. doi: 10.1088/1674-1137/35/1/022
[14]	ZHANG Bin , CHEN Yi-Xue , WANG Wei-Jin , YANG Shou-Hai , WU Jun , YIN Wen , LIANG Tian-Jiao , JIA Xue-Jun . Preliminary shielding analysis in support of the CSNS target station shutter neutron beam stop design. Chinese Physics C, 2011, 35(8): 791-795. doi: 10.1088/1674-1137/35/8/017
[15]	WU Xiao-Bing , OUYANG Hua-Fu . Thermal analysis of the CSNS H^－ ion source. Chinese Physics C, 2010, 34(5): 580-583. doi: 10.1088/1674-1137/34/5/013
[16]	XIAO Yong-Chuan , FU Shi-Nian . Study on the Lorentz detuning and tuning of β=0.3, 352 MHz spoke cavity. Chinese Physics C, 2009, 33(9): 815-818. doi: 10.1088/1674-1137/33/9/021
[17]	YAO Zhong-Yuan , LU Xiang-Yang , ZHAO Kui . Design of a 450 MHz β=0.2 single spoke cavity at PKU. Chinese Physics C, 2009, 33(4): 292-296. doi: 10.1088/1674-1137/33/4/011
[18]	OUYANG Hua-Fu , LIU Hua-Chang , FU Shi-Nian . Study of the design of CSNS MEBT. Chinese Physics C, 2009, 33(7): 583-589. doi: 10.1088/1674-1137/33/7/015
[19]	GE Ming-Qi , ZHAO Sheng-Chu . Lorentz Force Detuning Analysis of 700MHz Single-Cell Superconducting Cavity. Chinese Physics C, 2005, 29(4): 413-417.
[20]	ZHU Feng , QUAN Sheng-Wen , WANG Li-Fang , ZHAO Kui , CHEN Jia-Rong . Design of a β=0.45, f=350 MHz Spoke Cavity. Chinese Physics C, 2005, 29(1): 77-80.

Access

Get Citation

LIU Hua-Chang and OUYANG Hua-Fu. Thermal analysis and water-cooling design of the CSNS MEBT 324MHz buncher cavity[J]. Chinese Physics C, 2008, 32(4): 280-284. doi: 10.1088/1674-1137/32/4/008

LIU Hua-Chang and OUYANG Hua-Fu. Thermal analysis and water-cooling design of the CSNS MEBT 324MHz buncher cavity[J]. Chinese Physics C, 2008, 32(4): 280-284. doi: 10.1088/1674-1137/32/4/008 shu

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2007-06-04
Revised: 2007-06-13

Article Metric

Article Views(2977)
PDF Downloads(754)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Thermal analysis and water-cooling design of the CSNS MEBT 324MHz buncher cavity

Corresponding author: LIU Hua-Chang,

Received Date: 2007-06-04

Accepted Date: 2007-06-13

Available Online: 2008-04-05

Abstract:

At least two bunchers are needed in the 3MeV H^－ Medium Energy Beam Transport (MEBT) line located between RFQ and DTL for the CSNS (China Spallation Neutron Source). A nose-cone geometry has been adopted as the type of buncher cavity for its simplicity, higher impedance and lower risk of multipacting. By making use of the results got from the simulations on the buncher with two-dimension code SUPERFISH, the thermal and structural analyses have been carried out, the process and results to determine the resulting frequency shift due to thermal and structural distortion of the cavity are presented, the water-cooling channel position and the optimum cooling water temperature as well as the tuning method by adjusting the cooling water temperature when the cavity is out of resonance are also determined through the analyses.

HTML

Reference (1)

Thermal analysis and water-cooling design of the CSNS MEBT 324MHz buncher cavity

Abstract：

References

Access

Article Metrics

Metrics

通讯作者: 陈斌, bchen63@163.com

Email This Article