Processing math: 100%

Revisiting the determining fraction of glueball component in f0 mesons via radiative decays of J/ψ

Cited by

1. Giacosa, F., Kovács, P., Jafarzade, S. Ordinary and exotic mesons in the extended Linear Sigma Model[J]. Progress in Particle and Nuclear Physics, 2025. doi: 10.1016/j.ppnp.2025.104176
2. Li, H.-N.. Dispersive Analysis of Excited Glueball States[J]. Chinese Physics Letters, 2024, 41(10): 101101. doi: 10.1088/0256-307X/41/10/101101
3. Zou, J., Gui, L.-C., Chen, Y. et al. The radiative decay of scalar glueball from lattice QCD[J]. Science China: Physics, Mechanics and Astronomy, 2024, 67(11): 111012. doi: 10.1007/s11433-024-2451-5
4. Dorofeev, V.A., Eremeev, D.R., Gotman, V.G. et al. Study of a near-threshold scalar resonance in the ωϕ system in pion-Be interaction at momentum of 29 GeV[J]. European Physical Journal A, 2024, 60(5): 105. doi: 10.1140/epja/s10050-024-01307-5
5. Ren, J.-L., Li, M.-Q., Liu, X. et al. The B0→J/ψf0(1370,1500,1710) decays: an opportunity for scalar glueball hunting[J]. European Physical Journal C, 2024, 84(4): 358. doi: 10.1140/epjc/s10052-024-12702-z
6. Braghin, F.L.. Quark-antiquark states of the lightest scalar mesons within the Nambu-Jona-Lasinio model with flavor-dependent coupling constants[J]. Journal of Physics G: Nuclear and Particle Physics, 2023, 50(9): 095101. doi: 10.1088/1361-6471/acdaea
7. Klempt, E., Nikonov, K.V., Sarantsev, A.V. et al. Search for the tensor glueball[J]. Physics Letters, Section B: Nuclear, Elementary Particle and High-Energy Physics, 2022. doi: 10.1016/j.physletb.2022.137171
8. Klempt, E., Sarantsev, A.V. Singlet-octet-glueball mixing of scalar mesons[J]. Physics Letters, Section B: Nuclear, Elementary Particle and High-Energy Physics, 2022. doi: 10.1016/j.physletb.2022.136906
9. Li, H.-N.. Dispersive analysis of glueball masses[J]. Physical Review D, 2021, 104(11): 114017. doi: 10.1103/PhysRevD.104.114017

Figures(1) / Tables(4)

Get Citation
Xing-Dao Guo, Hong-Wei Ke, Ming-Gang Zhao, Liang Tang and Xue-Qian Li. Revisiting the determining fraction of glueball component in f0 mesons via radiative decays of J/ψ[J]. Chinese Physics C. doi: 10.1088/1674-1137/abccad
Xing-Dao Guo, Hong-Wei Ke, Ming-Gang Zhao, Liang Tang and Xue-Qian Li. Revisiting the determining fraction of glueball component in f0 mesons via radiative decays of J/ψ[J]. Chinese Physics C.  doi: 10.1088/1674-1137/abccad shu
Milestone
Received: 2020-08-13
Article Metric

Article Views(1593)
PDF Downloads(23)
Cited by(9)
Policy on re-use
To reuse of Open Access content published by CPC, for content published under the terms of the Creative Commons Attribution 3.0 license (“CC CY”), the users don’t need to request permission to copy, distribute and display the final published version of the article and to create derivative works, subject to appropriate attribution.
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Email This Article

Title:
Email:

Revisiting the determining fraction of glueball component in f0 mesons via radiative decays of J/ψ

  • 1. College of Physics and New Energy, Xuzhou University of Technology, Xuzhou 221111, China
  • 2. School of Science, Tianjin University, Tianjin 300072, China
  • 3. Department of Physics, Nankai University, Tianjin 300071, China
  • 4. College of Physics, Hebei Normal University, Shijiazhuang 050024, China

Abstract: QCD theory predicts the existence of glueballs, but so far all experimental endeavors have failed to identify any such states. To remedy this discrepancy between QCD, which has proven to be a successful theory for strong interactions, and the failure of experimental searches for glueballs, one is tempted to accept the promising interpretation that the glueballs mix with regular qˉq states of the same quantum numbers. The lattice estimate of the masses of pure 0++ glueballs ranges from 1 to 2 GeV, which is the region of the f0 family. Thus many authors suggest that the f0 mesonic series is an ideal place to study possible mixtures of glueballs and qˉq. In this paper, following the strategy proposed by Close, Farrar and Li, we try to determine the fraction of glueball components in f0 mesons using the measured mass spectra and the branching ratios of J/ψ radiative decays into f0 mesons. Since the pioneering papers by Close et al., more than 20 years have elapsed and more accurate measurements have been done by several experimental collaborations, so it is time to revisit this interesting topic using new data. We suppose f0(500) and f0(980) to be pure quark states, while for f0(1370), f0(1500) and f0(1710), to fit both the experimental data of J/ψ radiative decay and their mass spectra, glueball components are needed. Moreover, the mass of the pure 0++ glueball is phenomenologically determined.

    HTML

    I.   INTRODUCTION
    • Quantum chromodynamics (QCD) theory demands the existence of glueballs because of interactions among gluons. Glueballs behave differently from qˉq systems - for example, they do not directly couple to photons - so their special characteristics can help to identify glueball states. Generally, several models based on lattice QCD [1-3] suggest 0++ glueball to be the lowest-lying glueball. It has the same quantum numbers as the iso-singlet scalar meson f0 family (i.e the so far observed series of f0(500), f0(980), f0(1370), f0(1500), f0(1710), f0(2020) and f0(2100)).

      It is discouraging that after many years of exhaustive effort, no pure glueballs have been experimentally observed, even though theoretical studies repeatedly predict their existence and estimates of their masses have been presented. Lattice QCD computations have predicted the mass of a 0++ glueball (which might be the lightest glueball) as 1.73 GeV [1], 1.71 GeV [2] and 1.55±0.05 GeV [3], while the QCD sum rules determine it to be 1.50±0.2 GeV [4], 1.71 GeV [5] and 1.50±0.06 GeV [6]. Phenomenological studies [7-10] suggest the mass of the lightest glueball to be around 1.51.7 GeV. Moreover, in Refs. [11-13] the authors suggest that the 0++ glueball might have two lower states [12] with masses of 1.01.25 GeV and 1.4±0.2 GeV, and the authors of Ref. [13] favor the mass of the 0++ glueball as 1.25±0.2 GeV. Even though the theoretical estimates of the mass of the 0++ glueball are so diverse, they all suggest the mass to be within a range of 1.2 1.7 GeV. A study of the mass of the 0++ glueball based on analysis of the data would therefore be welcome.

      On other aspects, due to the failure of experimental searches for glueballs, we are tempted to consider that the QCD interaction would cause glueballs to mix with the qˉq states of the same quantum numbers, so that the possibility that pure glueballs exist independently in nature seems to be slim, even though it cannot be completely ruled out. In other words, glueballs would mix with qˉq states to make hadrons. This scenario could certainly reconcile the discrepancy between the QCD prediction and the experimental observation. In fact, the mass of a pure glueball is only a parameter which does not have a definite physical meaning.

      In Refs. [8, 14-19], the authors considered f0(1370), f0(1500) and f0(1710) as mixtures of glueballs and JPC=0++ qˉq bound states. They preferred f0(1500) as a hadron dominated by a glueball component. Furthermore, in Refs. [20, 21] the authors further extended the scenario by involving possible components of the hybrid state qˉqg which may provide better fits to the available data. Contrary to the above consideration, in Refs. [17, 18], f0(1710) was supposed to be dominated by the glueball component, but not a pure glueball.

      As the first step, in this work, we restrict ourselves to the scenario where only mixtures of glueballs and qˉq are considered, while a possible contribution of hybrids to the mass spectra of the f0 family is ignored.

      We first calculate the masses of the qˉq bound states by solving the Schr¨odinger equations. Some authors have extended the equation into its relativistic form for estimating the mass spectra of heavy-light mesons and the results seem to be closer to the data. Following Ref. [22], we calculate the light quark-antiquark system in the relativistic Schr¨odinger equations.

      The results indicate that the experimentally measured masses of f0(500) and f0(980) can correspond to the qˉq states (ground states of uˉu+dˉd2 and sˉs), so can be considered as pure bound quark-antiquark states. However, their spectra (including ground and excited states) do not correspond to the physical masses f0(1370), f0(1500) and f0(1710), signifying that these cannot be pure qˉq states and extra components should be involved. To evaluate the fractions of glueballs in those states, diagonalizing the mass matrix whose eigenvalues correspond to the masses of the physical states and the transformation unitary matrix determines the fractions of qˉq and glueball in the mixtures. We define four parameters: λNG,λSG,λNS and mG which respectively are the mixing parameters between uˉu+dˉd2 and glueball, sˉs and glueball, uˉu+dˉd2 and sˉs states, and the mass of a pure glueball.Even though fixing these four parameters can be done with this manipulation, to be more convincing and accurate, we adopt the strategy provided by Close, Farrar and Li [7], analyzing the radiative decays of J/ψγ+f0 to reproduce those parameters, so that the results can be checked.

      After this introduction, in Section II we calculate the mass spectra of qˉq states of 0++ by solving the relativistic Schr¨odinger equations. In Section III, via a full analysis we confirm three physical states (f0(1370), f0(1500) and f0(1710)) as mixtures of qˉq and glueballs. Then in the following section, we present the scheme of Close, Farrar et al. for J/ψγ+f0 where f0 refers to f0(1370), f0(1500) and f0(1710), and extract useful information about the fraction of glueball components in those mesons. Then we calculate several ratios which may help to clarify the structures of various f0 states. A brief discussion and conclusion are presented in the last section.

    II.   0++ qˉq SYSTEMS
    • First, in terms of the relativistic Schr¨odinger equation, let us calculate the mass spectra of f0 by assuming them to be made of a light quark and an anti-quark. Using the so-called relativistic Schrödinger equation is only an improvement to the regular one. In the Hamiltonian, only the concerned kinetic part of the light quark (anti-quark) adopts the relativistic form and the other part is unchanged. Because the light quarks are not as heavy as c or b quarks, one can believe that the modification may provide a physical picture which is closer to the physical reality. But, of course, it is not like the Dirac equation; it is only an improvement of the non-relativistic Schrödinger equation.

      In Ref. [23] the authors study the Bc meson, which contains two heavy quarks (anti-quarks) through the relativistic Schrödinger equation, while in Refs. [22, 24-25] mesons which contain a heavy quark (anti-quark) and a light quark (anti-quark) were investigated in the same scenario. In Ref. [26] the authors studied ϕ in terms of the relativistic Schrödinger equation and in Ref. [27] the authors studied ρ and ϕ via the relativistic Schrödinger equation. In Ref. [28] many light mesons with different quantum numbers have been studied in terms of the relativistic Schrödinger equation. In all these studies, obvious improvements were reported, namely the resulting solutions are closer to the data. Since f0 mesons are 0++ states, the relative orbital angular momentum l=1. Following Ref. [22], the effective Hamiltonian is

      H=21+m21+22+m22+V0(r)+H,

      (1)

      where m1 and m2 are the masses of the light quark and anti-quark respectively. In our numerical computations we set m1=m2=0.3 GeV for the u and d quark, and m1=m2=0.5 GeV for the s quark. 21 and 22 act on the fields of q1 and ˉq2, V0(r) is a combination of the QCD-Coulomb term and a linear confining term [28-30]

      V0(r)=43αs(r)r+κr+c.

      (2)

      Here αs(r) is the coupling constant. For the concerned energy scale of ΛQCD300 MeV the non-perturbative QCD effect dominates and so far αs(r) cannot be determined by a general principle. Thus, one generally needs to invoke concrete models where the model-dependent parameters are adopted by fitting data. Indeed, theoretical uncertainties are unavoidable. In this work, the running coupling constant αs(r), expressed in terms of a function of coordinates, can be obtained through the Fourier transformation of αs(Q2). Following Refs. [22, 28], we have

      αs(r)=Σiαi2πγir0ex2dx,

      (3)

      where αi and γi are free constants, which were fitted [22, 28] by making the behavior of the running coupling constant αs(r) at short distances coincide numerically with αs(Q2) predicted by QCD. In our calculation we follow their work and take α1=0.15,α2=0.15,α3=0.20 and γ1=1/2,γ2=10/2,γ3=1000/2.

      Since we are dealing with the P-wave structure of qˉq, the spin-spin hyperfine interaction and spin-orbit interaction are concerned and an extra Hamiltonian H can be written as

      H=Vhyp(r)+Vso(r).

      (4)

      The spin-spin hyperfine interaction is

      Vhyp(r)=32π9m1m2αsδσ(r)s1s243αsm1m21r3(3s1rs2rr2s1s2),

      (5)

      with [22]

      δσ(r)=(σπ)3eσ2r2,

      (6)

      where σ is a phenomenological parameter and s1s2=1/4.

      The spin-orbit interaction is

      Vso(r)=43αsr3(1m1+1m2)(s1Lm1+s2Lm2)12rV0(r)r(s1Lm21+s2Lm22),

      (7)

      where L is the orbital angular momentum between the quark and anti-quark. For the 0++ state, we have s1L=s2L=1.

      Determining the five parameters is a bit tricky. We are dealing with f0 mesons whose contents do not include heavy quarks, so when using the potential model to calculate their mass spectra we need to adopt different schemes from that for heavy quarkonia, to determine the relevant parameters. Our strategy is as follows. We suppose f0(500) and f0(980) are pure quark states, i.e. mixtures of uˉu+dˉd2 (which we abbreviate as nˉn) and sˉs , and try to evaluate the mass eigenvalues of nˉn and sˉs (which are not physical states).

      We then try to fix the other two parameters κ and c. We define m0nˉn, m1nˉn and m2nˉn as the masses of the ground state, first excited state and the second excited state of nˉn. Similarly, for sˉs we have m0sˉs,m1sˉs,m2sˉs. Since there are no precise data available, according to the analyses made by previous authors we can set several inequalities as:

      mf0(500)m0nˉn<m0sˉsmf0(980),

      mf0(1370)m1nˉn<m1sˉsmf0(1710),

      mf0(2020)m2nˉn<m2sˉsmf0(2100).

      By these criteria, we cannot obtain exact numbers for b and c, but can set ranges for them. Fortunately the ranges are not too wide for further phenomenological applications. To satisfy the above constraints, we obtain κ=0.290.33 GeV2 and c=1.721.58 GeV. The masses of the ground, first excited and second excited states of nˉn and sˉsas are obtained as listed in Table 1. From the table, we note that the masses of the ground states of nˉn and sˉs are respectively 626636 MeV and 830848 MeV. We notice that all the achieved values are within certain ranges, but are not fixed numbers, as discussed above.

      As is supposed, f0(500) and f0(980) are mixtures of ground states of nˉn and sˉs, thus we step forward to deal with the mixing of nˉn and sˉs to result in the physical eigenstates of f0(500) and f0(980). The mixing matrix is written as

      (mf0(500)00mf0(980))=(cosθsinθsinθcosθ)(muˉu+dˉd2λλmsˉs)(cosθsinθsinθcosθ)=(cosθsinθsinθcosθ)(626636MeVλλ83084MeV)(cosθsinθsinθcosθ).

      (8)
      (a)
      principal quantum number n=1 n=2 n=3
      eigenvalue of nˉn 626636 MeV 13171353 MeV 18721949 MeV
      eigenvalue of sˉs 830848 MeV 15151544 MeV 20602130 MeV
      (b)
      f0(500) f0(980) f0(1370) f0(1500)
      mass 400550 MeV 990±20 MeV 12001500 MeV 1506±6 MeV
      decay width 400700 MeV 10100 MeV 200500 MeV 112±9 MeV
      f0(1710) f0(2020) f0(2100)
      mass 1704±12 MeV 1992±16 MeV 2101±7 MeV
      decay width 123±18 MeV 442±60 MeV 224+2321 MeV

      Table 1.  (a) Theoretically predicted mass spectra of nˉn and sˉs with the principal quantum numbers being n = 1, 2 and 3, and (b) masses of the f0 family which have been experimentally measured [31].

      Requiring mf0(500)=400550 MeV and mf0(980)=990±20 MeV, we find that when λ=201263 MeV and θ=30.733.9, our results coincide well with the conclusion of Refs. [32-34].

      With our strategy, the five parameters of αs(r) , which is running with respect to r, κ, c and λ, θ are determined, even though only certain ranges instead of exact numbers are provided. It is believed that the results are in accordance with the experimental tolerance.

      It is noted that if one only considers the qˉq structure, the range from a few hundreds of MeV to 2 GeV can only accommodate six P-wave 0++ eigenstates, so the masses of those excited eigenstates of n3 or l3 would be beyond this range. There indeed exist seven 0++ physical mesons which are experimentally observed within the aforementioned range. This fact signifies that there should exist something else beside the pure qˉq structures, and the most favorable candidate is mixtures of glueballs and qˉq. This observation inspires all researchers to explore the possible fractions of glueball components in the observed meson states.

    III.   STUDY ON THE MIXING OF QUARKONIUM AND GLUEBALLS
    • Our work is a phenomenological study and fully based on the available data. As discussed in previous sections, we find that the energy region of 12 GeV cannot accommodate seven pure 0++ qˉq states, so the picture of pure qˉq structures is contrary to experimental observations. Thus a scenario with a mixture of glueballs and qˉq within this energy region is favored. The decay rates of J/ψγ+f0 imply that f0(1370) and f0(1500) possess larger qˉq components, whereas f0(1710) has a large fraction of glueball component (see next section for detailed discussion).

      The lattice estimate suggests that the mass of the 0++ pure glueball is about 1.5 GeV, so one can naturally conjecture that f0(1370), f0(1500) and f(1710) are mixtures of qˉq and glueballs with certain fractions. The rest of the 0++ qˉq states would have negligible probability to mix with glueballs because their masses are relatively far from that of the pure glueball.

      As an ansatz, we propose that the physical states f0(1370), f0(1500) and f(1710) are mixtures of the second excited states of |N=nˉn and |S=|sˉs with glueball state |G. A unitary matrix U transforms them into the physical states as

      (|f0(1370)|f0(1500)|f0(1710))=U(|N|S|G)

      (9)

      and U is a unitary matrix with the compact form

      U=(c11c12c13c21c22c23c31c32c33).

      (10)

      By imposing the unitary condition on U, we should determine all the elements of U up to an arbitrary phase. Furthermore we will enforce a few additional conditions on the shape of the matrix: (1) the determinant of the matrix must be unity, and (2) the matrix elements must be real. Those requirements serve as a convention for fixing the unitary matrix. The unitary matrix U transforms the unphysical states |N,|S and |G into the physical eigenstates |f0(1370),|f0(1500) and |f0(1710), and at the same time diagonalizes the mass matrix ˜M as

      Mf0=U˜MU

      (11)

      with

      Mf0=(mf0(1370)000mf0(1500)000mf0(1710))

      (12)

      and

      ˜M=(mNλNSλNGλNSmSλSGλNGλSGmG)

      (13)

      Namely, mf0(1370),mf0(1370), and mf0(1710) are the three roots of the equation

      m3f0m2f0(mG+mS+mN)+mf0(mGmN+mGmS+mNmSλ2NGλ2SGλ2NS)(λ2NGmS+λ2SGmN+λ2NSmG2λNGλSGλNSmNmSmG)=0.

      (14)

      Since we know that QCD is flavor blinded, following Ref. [35], the relation uˉu/dˉd|H|G=sˉs|H|G should be satisfied. Thus we have

      N|H|GS|H|G=uˉu+dˉd2|H|Gsˉs|H|G=12+121=2,

      (15)

      namely λNG=2λSG. Furthermore, the phase spaces and off-mass-shell quark effect may also affect the relation between λNG and λSG, thus in our calculation we set the relation λNGλSG=1.31.5. Generally, we have three unknowns in the Hermitian matrix ˜M: λNS,λSG and mG. There are three independent equations, so we can fix all of the three unknowns. Moreover, the work of Close, Farrar and Li offers an opportunity to determine the relation between c33 and b1710 since we find that in f0(1710) the glueball component is dominant (see next section), namely we have the relation

      b1710c233b(R[G]gg)c233×1.

      (16)

      Carrying out the numerical computations, we obtain the transformation matrix which satisfies all the aforementioned requirements:

      U=(0.960.870.210.070.450.250.140.410.940.820.400.300.360.170.530.320.800.92).

      (17)

      With this transformation matrix, by solving the three mass equations, we obtain

      ˜M=(12761398.6MeV271MeV16489MeV271MeV15261550MeV11463MeV16489MeV11463MeV15701661MeV),

      (18)

      The masses mnˉn=13171353 MeV and msˉs=15151544 MeV in Table 1(a) are directly obtained by solving the relativistic Schrödinger equation in the section above. However, for light quarkonia, the parameters αs and κ for the linear potential cannot be well determined, so we set a criterion which involves a few physical inequalities to gain mnˉn and msˉs within reasonable ranges.

      Then we input the two values of mnˉn and msˉs into the non-diagonal mass matrix and by solving the secular equation we determine the masses of the physical f0 states. In principle we would simultaneously achieve the expected values of the non-diagonal matrix elements along with the physical masses of f0. However, we notice that the secular equation cannot be solved in the usual way, so we adopt an alternative method to simplify the problem. We pre-determine the ranges of the elements of the unitary matrix which diagonalizes the mass matrix and then substitute them into the secular equation to check if the equation can be satisfied, i.e. if all the requirements (unitarity, etc.) are fulfilled. Repeating the process many times, we find that the pre-determined ranges for the masses mnˉn and msˉs of the first excited states of nˉn and sˉs should be shifted slightly, to mnˉn=12761398 MeV and msˉs=15261550 MeV. Obviously, the small shifts do not correspond to any quantitative changes, but indeed are identical, even though the superficial values look a bit different. We can see that the newly obtained ranges roughly overlap with the previous ones.

      The solutions show that for f0(1370) and f0(1500), the main components are qˉq bound states, whereas the glueball component in f0(1710) is overwhelmingly dominant. It also suggests the mass of a pure glueball of 0++ to be 15701661 MeV. This value is consistent with the results calculated in quenched lattice QCD: 1710±50±80 MeV [2], 1648±58 MeV [36], 1654±83 MeV [37] and 1622±29 MeV [38].

    IV.   SIGNAL FOR GLUEBALL AND LIGHT QUARK PAIR MIXTURE IN f0 MESONS
    • In this section we calculate the rates of radiative decays J/ψγ+f0 which may expose the structures of various f0 states.

    • A.   Determining fractions of glueball components in f0 mesons via J/ψγ+f0 decays

    • In this section let us briefly introduce the results of Close, Farrar and Li, without going into the details of the derivations. In their pioneering work, it was proposed to determine the fraction of glueball components in a meson via J/ψγ+f0 decay. We especially focus on mixtures of f0(1370), f0(1500) and f0(1710) states with glueballs because if they are pure quark-antiquark states, the theoretically estimated values of their mass spectra obviously deviate from the data (see above section). In Refs. [7, 39], for searching glueball fraction, an ideal reaction is the radiative decays of J/ψ. Close, Farrar and Li formulated the decay branching ratios as

      R(J/ψγ+f0)=R(J/ψγ+gg)cRx|H0++(x)|28π(π29)mf0m2ΨΓ(f0gg),

      (19)

      where x=1m2f0m2ψ and cR=2/3 for the 0++ state, H0++(x) is a loop integral and its numerical result is given in Ref. [7]. The branching ratio b is defined as

      b(f0gg)=Γ(f0gg)Γ(f0all).

      (20)

      Taking experimental data [31], BR(J/ψγgg)=(8.8±1.1)%, BR(J/ψγf0(1370)γKˉK)=(4.2±1.5)×104 and BR(f0(1370)KˉK)=(35±13)% [40], and we can obtain the branching ratios of J/ψγf0(1370) which are listed in Table 2.

      BR(J/ψγf0) b(f0gg)
      f0(1370) (12.0±6.2)×104[31, 40] 27.5±19.4%
      f0(1500) (2.8±2.4)×104[31] 17.1±14.5%
      f0(1710) (18.8±1.9)×104[31] 85.5±18.6%

      Table 2.  b(f0gg) for f0(1370), f0(1500) and f0(1710) from experimental data.

      For f0(1500), combining BR(f0(1500)ππ)=(34.5±2.2)% and BR(f0(1500)ηη)=(6.0±0.9)% with BR(J/ψf0(1500)γππγ)=(1.09±0.24)×104 and BR(J/ψf0(1500)γηηγ)=(0.17±0.14)×104 [31], we have

      BR(J/ψγf0(1500))(ππ)=3.16×104(1±22.9%),=(3.16±0.72)×104BR(J/ψγf0(1500))(ηη)=2.83×104(1±83.7%)=(2.83±2.37)×104,

      (21)

      namely

      b1500(ππ)=19.1%(1±27.3%)=(19.1±5.2)%,b1500(ηη)=17.1%(1±85.0%)=(17.1±14.5)%.

      (22)

      To consider possible experimental errors, in our later calculations, we use b1500=0.171±0.145(ηη) as the input.

      For f0(1710), there are two possible ways to get the branching ratio of J/ψf0(1710)+γ, and we adopt one of them, for which the experimentalists provide the following information on the four sequential channels [31]

      BR(J/ψf0(1710)γKˉKγ)=(9.5+1.00.5)×104(9.5±1.0)×104,BR(J/ψf0(1710)γηηγ)=(2.4+1.20.7)×104,(2.4±1.2)×104BR(J/ψf0(1710)γππγ)=(3.8±0.5)×104,BR(J/ψf0(1710)γωωγ)=(3.1±1.0)×104,

      (23)

      as well the data on the decay modes of f0(1710) [41, 42]:

      BR(f0(1710)KˉK)=0.38+0.090.190.38±0.19;BR(f0(1710)ππ)=0.039+0.0020.0240.039±0.024;BR(f0(1710)ηη)=0.22±0.12.

      (24)

      Because these four channels probably dominate the radiative decay of J/ψf0(1710)+γ, as we summarize the four branching ratios, the resultant value should generally be close to unity. A straightforward calculation determines BR(J/ψf0(1710)γ)=(18.8±1.9)×104 which corresponds to b1710=85.5%(1±21.8%)=(85.5±18.6)%.

      An alternative approach is that we can directly use the available branching ratios of radiative decays of J/ψ to do the same job.

      BR(J/Ψγ+f0(1710))(KˉK)=25.0×104(1±52.1%)=(25.0±13.0)×104,BR(J/Ψγ+f0(1710))(ππ)=97.4×104(1±62.9%)=(97.4±61.3)×104,BR(J/Ψγ+f0(1710))(ηη)=10.9×104(1±74.0%)=(10.9±8.1)×104.

      (25)

      We have tried and noted that among the four channels, the calculated BR(J/Ψγ+f0(1710))(ηη) is too small. The reason might originate from the error in measuring Γ(f0(1710)ηη), whose value is not as reliable as the databook suggests [43]. Thus we only use the first two results for calculating b1710. Then we obtain the corresponding b1710 values as

      b1710(KˉK)=1.14(1±54.6%)=1.14±0.62b1710(ππ)=4.43(1±65.8%)=4.43±2.91.

      (26)

      For b1710(KˉK), even though the superficial central value of the b factor is above 1.0, when a large experimental error is taken into account, it is comparable with the value of b1710=(85.5±18.6)%. The two values are reasonably consistent with each other and this almost confirms that the aforementioned sequential decay channels dominate the radiative decays of J/ψf0(1710)+γ. Thus for BR(J/ψf0(1710)γ) we take its experimental value as (18.8±1.9)×104.

      We then obtain all the results which are listed in Table 2.

      As indicated in Ref. [7], the width of f0 is determined by the inclusive processes of f0gg and f0qˉq. It is noted that the contribution of the glueball component to the gg final state is of order 1, as b(R[G]gg)1, whereas

      b(R[qˉq]gg)=O(α2s)0.10.2.

      (27)

      In Fig. 1 we show that the value of b(R[qˉq]gg) is different if f0 is a glueball or qˉq bound state; readers can ignore the irrelevant hadronization processes.

      Figure 1.  (a) Mixing between nˉn and sˉs, (b) J/ψγ+f0 with f0 as a qˉq bound state, and (c) J/ψγ+f0 with f0 as a glueball.

      Combining with the updated experimental data, one can conclude from the pioneer paper of Close et al. that f0(1370) and f0(1500) possess larger qˉq components whereas f0(1710) has a large fraction of glueball consituent.

    • B.   Rates of f0 decaying into two pseudoscalar mesons

    • Following Refs. [17, 44], we have

      |M(FiKˉK)|2=2f21(raci12+ci2+2gKˉKsci3)2,|M(Fiππ)|2=6f21(ci12+gππsci3)2,|M(Fiηη)|2=2f21(a2ηci12+rab2ηci2+gηηs(a2η+b2η)ci3+gss(2a2η+b2η+42aηbη)ci3)2,

      (28)

      where Fi=(f0(1370),f0(1500),f0(1710)), f1 is the coupling constant of the OZI-allowed Feynman diagrams defined in Ref. [44], gs is the ratio of the OZI-suppressed coupling constant to that of the OZI-allowed one, gss is the ratio of the doubly OZI-suppressed coupling constant to that of the OZI-allowed one, and ra denotes a possible SU(3) breaking effect in the OZI allowed decays [44]. For aη and bη we have the relations

      aη=cosθ2sinθ3bη=sinθ+2cosθ3

      (29)

      with θ=14.4[44]. References [45, 46] show the relations gππs:gKˉKs:gηηs=0.834+0.6030.579:2.654+0.3720.402:3.099+0.3640.423through lattice calculation. In Ref. [44] the authors take two schemes with gKˉKs/gππs=1.55 for scheme I and 3.15 for scheme II. Then for scheme I they take gππs:gKˉKs:gηηs= 1:1.55:1.59 and after fitting data obtain gππs=0.48, gss=0 and ra=1.21. For scheme II they took gππs:gKˉKs:gηηs=1:3.15:4.74 and obtained gππs=0.10, gss=0.12 and ra=1.22. During their fitting process, msˉs and mG as input parameters were set in the same ranges as in our article, but for the value of mnˉn they took an input parameter 100MeV larger than that in our article. Considering the uncertainty of gππs:gKˉKs:gηηs, the two sets of parameters do not have a qualitative difference.

      From Refs. [17, 44] we have

      RFiππ/KˉK=Γ(Fiππ)Γ(FiKˉK)=3(ci12+gππsci3)2(raci12+ci2+2gKˉKsci3)2pπpK.

      (30)

      Then we list the ratios of FiPP for our predictions and experimental data in Table 3.

      experimental value scheme I scheme II
      Rf0(1370)ππ/KˉK >1 3.9811.68 1.221.88
      Rf0(1370)ηη/ππ 0.010.05 0.120.21
      Rf0(1370)KˉK/ηη 5.537.44 3.844.31
      Rf0(1500)ππ/KˉK 4.1±0.5 1.819520.07 0.020.47
      Rf0(1500)ηη/ππ 0.173±0.024 8.65×1050.14 0.7817.32
      Rf0(1500)KˉK/ηη 1.43±0.24 0.4810.72 2.713.31
      Rf0(1710)ππ/KˉK 0.23±0.05 0.300.41 0.71112.38
      Rf0(1710)ηη/ππ 2.09±0.80 0.590.82 9.69×1044.87
      Rf0(1710)ηη/KˉK 0.48±0.15 0.240.25 6.86×104114.20

      Table 3.  Ratios of FiPP for our predictions in scheme I and II, and for experimental data. All the experimental data for Rf0(1370)ππ/KˉK are taken from the PDG [31]. In the PDG the range of Rf0(1370)KˉK/ππ varies from 0.08±0.08 to 0.91±0.20, thus we only consider Rf0(1370)ππ/KˉK>1 here.

      From the table above we can see that in scheme I the upper limit of Rf0(1500)ππ/KˉK is 9520.07. This is caused by the destructive interference between the contributions of the glueball and quarkonia ingredients to f0(1500)KˉK; the lower bound of Rf0(1500)ηη/ππ is tiny because of a destructive interference between the glueball and quarkonia contributions to f0(1500)ηη. For scheme II, the destructive interference between the glueball and quarkonia contributions to f0(1710)ηη and KˉK lead the lower bound of Rf0(1710)ηη/ππ and Rf0(1710)ηη/KˉK to be negligible and the upper limit of Rf0(1710)ππ/KˉK and Rf0(1710)ηη/KˉK to be as large as 102. Different from Refs. [17, 44] where the authors preferred scheme II, we find that in our calculation scheme I may fit the experimental data better. With scheme I, our theoretical prediction for the ratios of the decay rates for the three channels of f0(1500) (Rf0(1500)ππ/KˉK, Rf0(1500)ηη/ππ and Rf0(1500)KˉK/ηη) deviate only slightly from experimental data, while for scheme II, the theoretical predictions obviously deviate from experimental data. Cheng et al. considered the two schemes based on the lattice results gππs:gKˉKs:gηηs=0.834+0.6030.579:2.654+0.3720.402:3.099+0.3640.423. Considering the large uncertainty, we believe our theoretical predictions can fulfill the experimental constraints.

    • C.   Rates of f0 decaying into two photons

    • The f0(1710)γγ decay would be the most sensitive channel to test the glueball fraction inside the hadron because gluons do not directly couple to photons. In early searches for glueballs, the rate of possible glueball decay into photons was considered to be seriously depressed and the mechanism was described by the word “stickiness,” which was the first criterion to identify a glueball. Thus for f0γγ, the amplitude is

      M(f0γγ)=cn<γγ|Heff|N>+cs<γγ|Heff|S>+cG<γγ|Heff|G>,

      and because Heff is a loop-induced effective Hamiltonian, it suffers an O(αsπ) suppression [47] compared to Heff. A detailed computation of the box-diagram has been given in the literature, but here we just make an order of magnitude estimate, which is enough for the present experimental accuracy.

      With this principle, here let us make a prediction ofFiγγ for f0(1370), f0(1500) and f0(1710) based on the values we have obtained in this work. As a comparison we list what the authors of Ref. [17] predicted

      Γ(f0(1370)γγ):Γ(f0(1500)γγ):Γ(f0(1710)γγ)=9.3:1.0:1.7

      (31)

      through the relation

      Γ(Fiγγ)(59ci12+19ci2)2,

      (32)

      where they neglected the contribution of the glueball component in Fi due to the O(αsπ) suppressed contribution to the amplitude. Although the contribution from the glueball component is suppressed, it may reach the error range determined by accurate measurement, thus in our calculation we present the ratios of Fiγγ with and without considering the contribution of the glueball:

      Γ(Fiγγ)|13(59ci12+19ci2)+Tr[tata]8O(αsπ)69ci3|2.

      (33)

      In our numerical calculations we take αs0.3 as a example. We list the corresponding results in Table 4.

      results from Ref. [17] without glueball component with glueball component
      Γ(f0(1370)γγ)Γ(f0(1500)γγ) 9.3 27.21.93×107 19.03208.3
      Γ(f0(1710)γγ)Γ(f0(1500)γγ) 1.7 5.84.13×106 0.00333.0
      Γ(f0(1710)γγ)Γ(f0(1370)γγ) 0.183 0.0870.261 6.8×1050.016

      Table 4.  Ratios of Fiγγ with and without considering the contribution from the glueball component.

      From the table above we find that without considering the contribution from the glueball component, the upper limits of Γ(f0(1370)γγ)/Γ(f0(1500)γγ) and Γ(f0(1710)γγ)/Γ(f0(1500)γγ) are extremely large, because of a destructive interference between the nˉn and sˉs contributions to f0(1500)γγ. Taking into account the contribution from the glueball component, the lower limit of Γ(f0(1710)γγ)/Γ(f0(1370)γγ) is tiny. This is caused by the destructive interference between the contributions of the glueball and quarkonia ingredients to f0(1710)γγ, whereas the upper bound of Γ(f0(1370)γγ)/Γ(f0(1500)γγ) is very large, which is caused by the destructive interference between nˉn and sˉs contributions to f0(1500)γγ.

      Apart from these extreme cases, we find that the decay width of f0(1710)γγ is smaller than that of f0(1370)γγ by one or two orders of magnitude for our structure assignments, i.e in f0(1710) the glueball component is dominant while in f0(1370) the quark component is dominant. The decay width of f0(1370)γγ is larger than that of f0(1500)γγ due to the fact that the nˉn and sˉs components constructively interfere for f0(1370) whereas they destructively interfere for f0(1500) in our scenario. The prediction is somewhat different from that made by Cheng et al. [17]. The comparison is shown in the above tables.

    V.   DISCUSSION AND CONCLUSION
    • The main purpose of this work is to explore the probability of mixing between 0++ qˉq states and glueballs. To serve this goal, we first calculated the mass spectra of six 0++ light qˉq bound states by solving the relativistic Schr¨odinger equation.

      The numerical estimates indicate that in order to fit the observed experimentally measured spectra of f0(500), f0(980), f0(1370), f0(1500), f0(1710), f0(2020) and f0(2100), an extra hadronic structure is needed to accommodate the seven members of the f0 family existing in the energy range from a few hundreds of MeV to 2 GeV. As suggested in the literature, the most favorable scenario is the mixing between qˉq and glueballs of the same quantum numbers. Instead of calculating the mixing based on complete theoretical frameworks, we investigate the mixing by analyzing experimental data. Besides properly diagonalizing the mass matrix, supplementary information about the fractions of the glueball components in the f0 mesons can be extracted from the data of J/ψ radiative decays to f0. It is found that in f0(1370) and f0(1500) there are mainly qˉq bound states whereas in f0(1710) a glueball component dominates.

      In this work, we obtained the mixing parameters by a phenomenological study, while some authors have tried to calculate them directly in terms of certain models. Within this energy range, the dominant dynamics is the non-perturbative QCD which induces the mixing. Since solid knowledge about non-perturbative QCD is still lacking, the theoretical calculation heavily relies on the models adopted, where some model-dependent parameters have to be input and cause uncertainties in the theoretical estimates. Among those calculations, the results of the lattice calculations [1-3] and those based on the QCD sum rules [4-6, 12, 13] may make more sense even though they are still not completely trustworthy. Combining the phenomenological studies by analyzing the experimental data and those estimates based on theoretical frameworks may shed light on this intriguing field.

      Now let us briefly discuss the other 0++ states, f0(500), f0(980), f0(2020) and f0(2100). Since their masses are far below or above the assumed glueball mass, according to the principles of quantum mechanics, their mixing with glueballs should be small and can be ignored at the first order of approximation. In our calculation, f0(500) and f0(980) are considered as mixtures of ground states of nˉn and sˉs. This result is consistent with the conclusion of Refs. [33, 34]. Alternatively, in Ref. [48] the authors studied the five 0++ states f0(500), f0(980), f0(1370), f0(1500) and f0(1710), concluding that those five states are composed of two lowest-lying four-quark scalar meson nonets, two next-to-lowest lying two-quark nonets, and a scalar glueball. In their work, f0(500) is considered as a non-strange four-quark component dominated bound state rather than a quark pair bound state.

      The reason that we are able to carry out this exploration is that much more data in this energy range has been accumulated and the measurements are obviously more accurate than 25 years ago. However, as one can see, the precision is still far below the requirement for determining the mixing parameters well. We therefore set our hope on the experimental progress which will be made by the BESIII, BELLE, and LHCb experiments, and probably the future charm-tau factory. To verify this mixing scenario one certainly needs to do more theoretical work, including estimating the production (not only via the radiative decays of J/ψ) and decay rates of f0 families. Further work, both experimental and theoretical, is badly needed.

      Moreover, in this work, following the strategy provided by Close et al., we suppose that the f0 family only contains mixtures of light quarkonia and glueballs and have carried out calculations on the mass spectra of the mixtures. Obviously the phenomenological consequences depend heavily on the ansatz. As we state above, it is probably true for the first order approximation. It has been noted that the f0 family may not only be mixtures of glueballs and light quakonia, but also hybrids made of qˉqg [20, 21] or even four-quark states [49, 50]. Therefore, we are not going to make a bold prediction here, but as promised, we will redo the estimates which were done in Refs. [20, 21] and [49, 50], based on the new framework. We may then provide some theoretical predictions for the decay rates of f0 mesons which can soon be checked by more accurate data from BESIII, BELLE and LHCb.

Reference (50)

目录

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return