Investigation on the fabrication of the 3rd harmonic superconducting cavity for the SSRF storage ring

MA Zhen-Yu; MA Guang-Ming; YU Hai-Bo; MAO Dong-Qing; FENG Zi-Qiang; HOU Hong-Tao; LIU Jian-Fei

doi:10.1088/1674-1137/33/9/017

Chinese Physics C> 2009, Vol. 33> Issue(9) : 792-797 DOI: 10.1088/1674-1137/33/9/017

Investigation on the fabrication of the 3rd harmonic superconducting cavity for the SSRF storage ring

Abstract
HTML
Reference
Related

PDF

Abstract：
A third harmonic superconducting niobium cavity has been proposed for installation in the Shanghai Synchrotron Radiation Facility (SSRF) storage ring to improve the Touschek lifetime. In order to investigate the feasibility of the superconducting cavity fabrication indigenously and the possibility to master the fabrication techniques, cavities were fabricated from copper and niobium sheets by deep drawing and electron-beam welding, and a series of measurements, such as resonant frequency, shape dimensions and wall thickness, were carried out during this process. After analysis of various problems existing in the fabrication process, technique improvements were proposed, and finally the precise shape as designed and resonant frequency within 1.2 MHz were achieved for the new completed cavities. In addition, full annealing was finally proved to be a good cure for niobium sheets' tearing up during deep drawing. By fabricating niobium cavities successfully, some problems to the next step were cleared. This paper introduces the process of cavity fabrication and its technique improvements towards forming, and the initial vertical test result of niobium cavity is also presented.

References

[1]

. ZHAO Z T. Nucl. Sci. Tech, 2003, 14(2): 12. Byrd J M, Georgsson M. Phys. Rev. Special Topics AB,2001, 4: 0307013. Byrd J M, Baptiste K, De Santis S et al. Nucl. Instrum.Methods in Phys. Res. A, 2000, 439: 154. Bosland P, Bredy Ph, Charrier J P et al. Super-3HC Cry-omodule: Layout and First Tests. Paris, France: EPAC.2002. 2217-22195. Kim E S, Sohn Y U, Chun M H et al. Design of a ThirdHarmonic Superconducting RF System at PLS. Lucerne,Switzerland. EPAC. 2004. 2125-21276. Georgsson M, Anders W, Kramer D et al. Nucl. Instrum.Methods in Phys. Res. A, 2001, 469: 3737. Ohkuma H. TOP-UP Operation in Light Sources. Genoa,Italy. EPAC. 2008. 36-408. ZHAO Z T, XU H J, DING H. Genoa, Italy. EPAC. 2008.998-10009. MA G M, ZHAO Z T, LIU J F. Chin. Phys. C (HEP NP), 2008, 32: 27510. HAO Jian-Kui et al. HEP NP, 2001, 25(6): 582 (in Chi-nese)11. Padamsee H, Knoblocn J, Hays T. RF superconductivityfor Accelerators. New York: John Wiley Sons, Inc., 1998.105-12712. Palmieri V. Seamless Superconducting RF Cavities. Pro-ceedings of the Particle Accelerator Conference. New York.1999. 541-54413. Singer W et al. AIP, 2003, 671: 16214. Hartwig K T et al. IEEE Transactions on Applied Super-conductivity, 2007, 17: 130515. Saito K et al. Half-Cell Die Designe for Right Cavity Ge-ometry in High Insity SC Proton Linac. Proceedings of the11th RF Superconductivity Workshop. Travemunde: Ger-many. 2003, 41

[1]	Xiao-Ni Li , Wei-Qiang Wen , Heng Du , Peng Li , Xiao-Hu Zhang , Xue-Jing Hu , Guo-Feng Qu , Zhong-Shan Li , Wen-Wen Ge , Jie Li , Han-Bing Wang , Jia-Wen Xia , Jian-Cheng Yang , Xin-Wen Ma , You-Jin Yuan . Simulation of longitudinal dynamics of laser-cooled and RF-bunched C³⁺ ion beams at heavy ion storage ring CSRe. Chinese Physics C, 2017, 41(7): 077003. doi: 10.1088/1674-1137/41/7/077003
[2]	Jia-Jun Zheng , Yong-Liang Yang , Bao-Gen Sun , Fang-Fang Wu , Chao-Cai Cheng , Kai Tang , Jun-Hao Wei . Central RF frequency measurement of the HLS-Ⅱ storage ring. Chinese Physics C, 2016, 40(4): 047005. doi: 10.1088/1674-1137/40/4/047005
[3]	XU Meng-Xin , HE Yuan , ZHANG Sheng-Hu , XIA Jia-Wen . Adjusting the accelerating field distribution of a superconducting CH cavity. Chinese Physics C, 2015, 39(5): 057009. doi: 10.1088/1674-1137/39/5/057009
[4]	Saroj Jena , S. Yadav , R. K. Agrawal , A. D. Ghodke , Pravin Fatnani , T. A. Puntambekar . Stabilization of betatron tune in Indus-2 storage ring. Chinese Physics C, 2014, 38(6): 067002. doi: 10.1088/1674-1137/38/6/067002
[5]	BAI Zheng-He , WANG Lin , JIA Qi-Ka , LI Wei-Min . Lattice study for the HLS-Ⅱ storage ring. Chinese Physics C, 2013, 37(4): 047004. doi: 10.1088/1674-1137/37/4/047004
[6]	BAI Zheng-He , WANG Lin , JIA Qi-Ka , LI Wei-Min . Lattice optimization for the HLS-Ⅱ storage ring. Chinese Physics C, 2013, 37(1): 017001. doi: 10.1088/1674-1137/37/1/017001
[7]	FAN Hao , WU Cong-Feng , LIU Guang-Chao . Calculations of operating schemes for a passive harmonic cavity in HLS-Ⅱ. Chinese Physics C, 2012, 36(9): 895-899. doi: 10.1088/1674-1137/36/9/018
[8]	ZHAO Yu-Ning , LI Wei-Min , WU Cong-Feng , WANG Lin . Study of Robinson instabilities with a higher-harmonic cavity for the HLS phase Ⅱ project. Chinese Physics C, 2012, 36(11): 1136-1139. doi: 10.1088/1674-1137/36/11/018
[9]	ZHANG Meng , ZHAO Ming-Hua , WANG Bao-Liang . Study of multipacting effect in sub-harmonic buncher of SSRF linac. Chinese Physics C, 2009, 33(S2): 86-88. doi: 10.1088/1674-1137/33/S2/022
[10]	CHEN Jian-Hui , ZHANG Man-Zhou , ZHAO Zhen-Tang . Orbit response matrix analysis and lattice periodicity restoration of the SSRF storage ring. Chinese Physics C, 2009, 33(9): 785-788. doi: 10.1088/1674-1137/33/9/015
[11]	CHEN Jian-Hui , ZHAO Zhen-Tang . Preliminary application of turn-by-turn data analysis to the SSRF storage ring. Chinese Physics C, 2009, 33(7): 590-593. doi: 10.1088/1674-1137/33/7/016
[12]	HOU Jie , TIAN Shun-Qiang , ZHANG Man-Zhou , XU Yi , LIU Gui-Min . Studies of closed orbit correction and slow orbit feedback for the SSRF storage ring. Chinese Physics C, 2009, 33(2): 145-150. doi: 10.1088/1674-1137/33/2/013
[13]	ZHOU Xue-Mei . Measurement of optics for the SSRF storage ring in commissioning. Chinese Physics C, 2009, 33(S2): 78-82. doi: 10.1088/1674-1137/33/S2/020
[14]	JIANG Bo-Cheng , CHEN Guang-Ling , CHEN Jian-Hui , LIU Gui-Min , ZHAO Zhen-Tang . Observation of beam instability in the SSRF storage ring. Chinese Physics C, 2009, 33(S2): 75-77. doi: 10.1088/1674-1137/33/S2/019
[15]	HUANG Tong-Ming , MA Qiang , PAN Wei-Min , WANG Guang-Wei . Fabrication of the high power input coupler for BEPCⅡ superconducting cavities. Chinese Physics C, 2008, 32(11): 931-933. doi: 10.1088/1674-1137/32/11/017
[16]	ZHANG Meng , ZHAO Ming-Hua . Study of multipacting effect in superconducting cavity. Chinese Physics C, 2008, 32(10): 846-848. doi: 10.1088/1674-1137/32/10/016
[17]	TIAN Shun-Qiang , HOU Jie , CHEN Guang-Ling , LIU Gui-Min . New chromaticity compensation approach and dynamic aperture increase in the SSRF storage ring. Chinese Physics C, 2008, 32(8): 661-664. doi: 10.1088/1674-1137/32/8/015
[18]	MA Guang-Ming , ZHAO Zhen-Tang , LIU Jian-Fei . Design of a higher harmonic cavity for the SSRF storage ring. Chinese Physics C, 2008, 32(4): 275-279. doi: 10.1088/1674-1137/32/4/007
[19]	KANG Wen , DING Xiao-Ping , HAN Qian , PANG Jia-Biao , CHEN Sen-Yu . Design and Construction of a Thin Septum Magnet Prototype for Injection of SSRF Storage Ring. Chinese Physics C, 2002, 26(4): 423-429.
[20]	Rao Yinong , Xia Jiawen , Yuan Youjin , Wei Baowen . Simulation of Electron Cooling Process in a Storage Ring. Chinese Physics C, 1997, 21(S2): 73-84.

Access

Get Citation

MA Zhen-Yu, MA Guang-Ming, YU Hai-Bo, MAO Dong-Qing, FENG Zi-Qiang, HOU Hong-Tao and LIU Jian-Fei. Investigation on the fabrication of the 3rd harmonic superconducting cavity for the SSRF storage ring[J]. Chinese Physics C, 2009, 33(9): 792-797. doi: 10.1088/1674-1137/33/9/017

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2008-11-24
Revised: 2009-03-26

Article Metric

Article Views(2883)
PDF Downloads(620)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Investigation on the fabrication of the 3rd harmonic superconducting cavity for the SSRF storage ring

Corresponding author: LIU Jian-Fei,

Received Date: 2008-11-24

Accepted Date: 2009-03-26

Available Online: 2009-09-05

Abstract:

A third harmonic superconducting niobium cavity has been proposed for installation in the Shanghai Synchrotron Radiation Facility (SSRF) storage ring to improve the Touschek lifetime. In order to investigate the feasibility of the superconducting cavity fabrication indigenously and the possibility to master the fabrication techniques, cavities were fabricated from copper and niobium sheets by deep drawing and electron-beam welding, and a series of measurements, such as resonant frequency, shape dimensions and wall thickness, were carried out during this process. After analysis of various problems existing in the fabrication process, technique improvements were proposed, and finally the precise shape as designed and resonant frequency within 1.2 MHz were achieved for the new completed cavities. In addition, full annealing was finally proved to be a good cure for niobium sheets' tearing up during deep drawing. By fabricating niobium cavities successfully, some problems to the next step were cleared. This paper introduces the process of cavity fabrication and its technique improvements towards forming, and the initial vertical test result of niobium cavity is also presented.

HTML

Reference (1)

Investigation on the fabrication of the 3rd harmonic superconducting cavity for the SSRF storage ring

Abstract：

References

Access

Article Metrics

Metrics

通讯作者: 陈斌, bchen63@163.com

Email This Article